Ecler WiSpeak CUBE is a self-powered 5" loudspeaker cabinet with wireless audio reception and control capabilities under the control of the Master unit, featuring an AUX output (Euroblock) and a installation system which is compatible with ceiling li
ECL-CUBE
Ecler WiSpeak CUBE is a self-powered 5" loudspeaker cabinet with wireless audio reception and control capabilities under the control of the Master unit, featuring an AUX output (Euroblock) and a installation system which is compatible with ceiling li
Temporarily out of stock
WiSpeak CUBE is a self-powered 5" loudspeaker cabinet with wireless audio reception and control capabilities under the control of the Master unit, featuring an installation system which is compatible with ceiling light rails. Alternatively, wall mount or desktop installation is as well possible by means of the included accessories.
Specs
WiS (RF WIRELESS DIGITAL AUDIO)
Frequency band
U-NII 5.1 – 5.8GHz (supported worldwide)
Up to 24 non-overlapping RF channels
DFS support
Coverage range
Up to 12m from a TX to any paired RX, direct line of sight
Audio channels
WiSpeak CH1 / CH2
Audio transmission
24bit uncompressed, 48kHz SR
Digital Audio Sample size
24 bits
Digital Audio Sampling rate
48 kHz
Digital Audio Frequency Response
20Hz – 20kHz (-0.1dB)
Digital Audio converters
DAC Resolution: 24 bit
DAC Dynaimic range: 100dB
Latency
From TX IN to RX AUX OUT <6ms
From TX IN to RX Speaker <6ms
Jitter among receivers ±1us
Pairing time
Up to 120s
Reconnection time
Up to 120s
SYSTEM
Effective Freq. Range
70 - 20kHz
Coverage angle
150x150 (HxV)
Sensitivity
83 dB (1W/1m)
Maximum SPL
98 dB continuous / 104 dB peak
TRANSDUCERS
Ways
2 ways
Low frequency driver
5" woofer
High frequency driver
1" tweeter
Nominal impedance
8Ω
POWERED
Power
32 W RMS / 128 W Peak
Audio inputs
CH1 / CH2: Digital, Mono, RF Wireless Audio
Audio outputs
Internal Loudspeaker: Analog, Mono, Self powered
AUX OUT: Analog, Mono, Balanced, Euroblock
THD + Noise
<0.15% @ 1kHz Full power
Signal Noise Ratio
>95dB at RX AUX OUT
Input sensitivity
0dBV / 10kΩ
ELECTRICAL
Power supply
Universal, internal power supply
AC mains requirement
100-240VAC @ 50-60Hz
AC mains connector
From lighting rail bracket, or standard 2-pin AC plug
Power consumption
15 W (rated)
MONITORING AND CONTROL
Volume control
via WiSpeak grip app.
Other controls
SOLO: via WiSpeak grip app
ID TEST SIGNAL: via WiSpeak grip app
PAIR / UNPAIR: via WiSpeak grip app and Panel button
LED Indicators
WiS and STR LEDs
Programing and control
via WiSpeak grip app.
PHYSICAL
Connection type
Standard 2-pin connector for VAC
Installation options
Surface, desktop, shelf, table, etc. Or in a ceiling light rail.
Certifications
FCC, EMC, CB
Enclosure material
ABS cabinet
Grille material
Aluminium
Mounting system
Lighting rail mount compatible
Pan and tilt wall-mount
Swivel (pan & tilt)
Rail fixing system
4 wire 3 circuit track system
Compatible rail systems
Global Track Pro or compatibles
Operating temperature
Min: -10°C ; 14°F
Max: 40°C ; 104°F
Operating humidity
<85% HR
Storage temperature
Min: -10°C ; 14°F
Max: 40°C ; 104°F
Storage humidity
<90% HR
Included accessories
Lighting rail mount, Surface / wall mount
Finished colour
White (RAL 9003) or black (RAL 9005)
Dimensions
173 x 180 x 181 mm / 6.81 x 7.09 x 7.13 in. (WxHxD)
Weight
2.1 kg / 4.6 lb
Pieces per box
1 unit
Shipping dimensions
320 x 260 x 220 mm / 12.6 x 10.24 x 8.66 in. (WxHxD)
Shipping weight
3.2 kg / 7.05 lb