New generation high-res Multi-track Handheld Recorder, w. Tochpanel operation, USB AUdio Interface, 4+2 Track recording up to 32 bit float/96kHz

Recorder specifications
Recording media
microSD card (64 MB – 2 GB)
microSDHC card (4–32 GB)
microSDXC card (48–512 GB)
Recording/playback formats
WAV (BWF): 44.1/48/96 kHz, 16/24 bit or 32 bit float
MP3: 44.1/48kHz, 128/192/256/320 kbit/s
Input channels
4 (maximum)
Recording tracks
6 (4 tracks + stereo mix)
Analogue audio inputs
Mic inputs 3–4 (balanced)
XLR-3-31 equivalent (1: GND, 2: HOT, 3: COLD)
6.3-mm TRS jacks (Tip: HOT, Ring: COLD, Sleeve: GND)
(phantom power over XLR only)
Input impedance
≥2.2 kΩ
Maximum input level
+2 dBu
Minimum input level
−75 dBu
Line inputs 3–4
XLR-3-31 equivalent (1: GND, 2: HOT, 3: COLD)
6.3-mm TRS jacks (Tip: HOT, Ring: COLD, Sleeve: GND)
Input impedance
≥9 kΩ
Maximum input level
+24 dBu
Minimum input level
−53 dBu
MIC/EXT IN (unbalanced)
3.5-mm mini jack (supports plug-in power)
Input impedance
10 kΩ (plug-in power off)
1.8 kΩ (plug-in power on)
Maximum input level
0 dBV
Minimum input level
−67 dBV
Analogue audio outputs
Line output (LINE OUT, unbalanced)
3.5-mm stereo mini jack
Output impedance
200 Ω
Nominal output level
−14 dBV
Maximum output level
+6 dBV
Headphones output
3.5-mm stereo mini jack
Maximum output
45 mW + 45 mW (THD+N: ≤0.1%, 32 Ω load)
Built-in speaker
0.4 W (mono)
Control inputs/outputs
USB port
USB Type-C connector
Format
USB 2.0 High Speed mass storage class
Bluetooth device connector
For Bluetooth adapter (AK-BT1) only
Audio performance
Equivalent input noise (EIN, mic inputs 3–4)
≤−125 dBu
Frequency response (inputs 3–4 to PCM data)
Fs 48 kHz: 20 Hz – 20 kHz, +0/−0.3 dB (JEITA)
Fs 96 kHz: 20 Hz – 40 kHz, +0/−0.7 dB (JEITA)
Dynamic range (20 kHz SPCL LPF, A-weighted, Field app)
Inputs 3–4 to PCM data
≥112 dB (48/96 kHz)
S/N ratio (20 kHz SPCL LPF, A-weighted)
Inputs 3–4
112 dB (48/96 kHz)
MIC/EXT IN
103 dB (48 kHz)
105 dB (96 kHz)
Total harmonic distortion ratio (THD+N, 1 kHz sine wave, –5 dBFS at input, GAIN at minimum, 20 kHz SPCL LPF)
Inputs 3–4 (LINE IN) to PCM data
0.008 %
Inputs 3–4 (MIC IN) to PCM data
0.006 %
Note: JEITA indicates conformance to JEITA CP-2150
Power supply and other specifications
Power supply
4 AA batteries (alkaline, Ni-MH or lithium-ion)
USB bus power from a computer
AC adapter (TASCAM PS-P520U, sold separately)
Power consumption
7.5 W (maximum)
Display
2.4-inch full-colour LCD touchscreen
Dimensions (W × H × D)
75 mm × 174 mm × 37 mm (excluding protrusions)
Weight
365 g (with batteries)
265 g (without batteries)
Operating temperature range
0–40 °C
Approximate battery operation time (continuous operation in hours:minutes)
Using alkaline batteries (Evolta)
Included mics, phantom power off, stereo WAV recording at 44.1 kHz / 24-bit
13:30
Included mics plus inputs 3-4, phantom power on, stereo WAV recording at 44.1 kHz / 24-bit
5:30
Using NiMH batteries (eneloop)
Included mics, phantom power off, stereo WAV recording at 44.1 kHz / 24-bit
11:00
Included mics plus inputs 3-4, phantom power on, stereo WAV recording at 44.1 kHz / 24-bit
5:30
Using lithium-ion batteries (Energizer Ultimate Lithium)
Included mics, phantom power off, stereo WAV recording at 44.1 kHz / 24-bit
22:00
Included mics plus inputs 3-4, phantom power on, stereo WAV recording at 44.1 kHz / 24-bit
11:30

---

---

Temporarily out of stock