• Bekafun
  • Next Pro Audio LA210x Active 3-Way Line Array Element

Next Pro Audio LA210x Active 3-Way Line Array Element

NPO-LA210X

TECHNICAL SPECIFICATIONS
Product Type: 3-Way Active Line Array Element
Frequency Response (-6dB): 58Hz - 19.000Hz
Low Frequency Extension (-10dB): 54Hz
Nominal Coverage (-6dB): 100º (300Hz - 16kHz) x 10º
RMS Power: 2000W (LF:1000W | MF:500W | HF:500W)
Amplifier Technology: 3-Channel UMAC Class D - Full Bandwidth PWM Modulator With Ultra-Low Distortion
DSP Technology: 96kHz / 40 bit SHARC DSP
Latency: 1.5ms or 0.5ms with "Low Latency Mode"
DSP Adjustable Parameters
Filters: PEQ, FIR, hi/lo-shelving, all-pass, band-pass, hi/lo-pass | Limiters: RMS Voltage, Peak Voltage | Groups: Mute, Delay, Level, Polarity, EQ
DSP Presets: 24
Delay Adjustment: 500ms (172m)
Control Type: Control via LCD and Encoder on the Back Panel | Control via Software Using Ethernet (RJ45)
Maximum SPL (calculated): RMS: 136dB | Peak: 142dB (Full-Space)
Low Frequency Driver: 2 x 10" / 3" VC, Neodymium, B&C Custom Speaker
High Frequency Driver: 1 x 1.4" Neodymium Coaxial Ring Radiator Driver (MF: 3" VC | HF: 2" VC)
Audio Signal Inputs
Analog | AES (AESOP)
Input Connectors: 1 x XLR | 1 x Neutrik EtherCON
Audio Signal Outputs
Analog | AES (AESOP) 32kHz - 196kHz
Output Connectors: 1 x XLR | 1 x Neutrik EtherCON®
Protections: Clip Limiter | Temperature | Over Current | DC Protection | HF Protection
Cooling Type
Convection with External Aluminum Heat Sink
Power Supply: UREC Universal Mains Switch Mode Power Supply (SMPS) with Power Factor Correction (PFC) and Standby Converter
Power Input: AC 100V - 240V 50Hz/60Hz
Mains Connector: Dual (IN/OUT) Neutrik powerCON TRUE1 TOP®
Power Consumption: 500W
Recommended Subwoofer: LAs518A
Fittings: 3-Point Adjustable Rigging System (0º to 10º with 1º Step)
Handles: 1 on Each Side, 2 on the Back
Grille: Black Perforated Steel
Construction: 15mm Multi-Laminate Birch Plywood
Finish: Semi-Matte Black Textured Coating
Dimensions (WxHxD): 720 x 350 x 550 mm (28.3 x 13.8 x 21.7 in)
Net Weight: 33kg (72.8lb)


€ 6.382,75
€ 5.275,00
prices incl. taxes and VAT

Temporarily out of stock

The LA210x is a medium format three-way, coaxial, active line array element designed to support a wide range of mid to large-sized touring applications and installations where easy to use, from transportation to installation and rigging, are critical. Built-in powerful DSP and amplification eliminates amplifier racks, long loudspeaker cables, and basic system calibration.

Custom made European transducers and a maximally optimized acoustic design provide excellent sound fidelity at very high SPL levels. The LA210x features dual 10-inch (3-inch voice coil) neodymium woofers and a groundbreaking coaxial ring radiator loaded by an exclusively developed OSWG waveguide. This acoustic design delivers exceptional phase coherence and consistent coverage down to 300Hz and the most accurate transient reproduction.

Onboard, advanced, powerful 96kHz/40bit SHARC DSP engine, monitored by built-in LCD screen with a preset loading encoder, can be remotely monitored and controlled through ethernet by a PC. The full-featured PC-software automatically identifies each device and allows simultaneous control of multiple devices through grouping facility. Everything you need to fine-tune the sound of your system is right there.

The system is driven by a passively cooled 2000W 3-way ultra-efficient Class-D amplifier module releasing 1000W for LF section, 500W for MF section and 500W for the HF section. Integrated universal mains power supply with PFC provides consistency and optimum performance anywhere in the world.

The 3-point rigging system allows for quick and easy system setup. The LA210X elements are easily connected via two front links. A rear center link allows the user to define relative splay angles from 1° to 10°. The system will automatically lock to the predefined angles when lifting the array.

Product Type

3-Way Active Line Array Element

Frequency Response (-6dB)

58Hz - 19.000Hz

Low Frequency Extension (-10dB)

54Hz

Nominal Coverage (-6dB)

100º (300Hz - 16kHz) x 10º

RMS Power

2000W (LF:1000W | MF:500W | HF:500W)

Amplifier Technology

3-Channel UMAC Class D - Full Bandwidth PWM Modulator With Ultra-Low Distortion

DSP Technology

96kHz / 40 bit SHARC DSP

Latency

1.5ms or 0.5ms with "Low Latency Mode"

DSP Adjustable Parameters

Filters: PEQ, FIR, hi/lo-shelving, all-pass, band-pass, hi/lo-pass | Limiters: RMS Voltage, Peak Voltage | Groups: Mute, Delay, Level, Polarity, EQ

DSP Presets

24

Delay Adjustment

500ms (172m)

Control Type

Control via LCD and Encoder on the Back Panel | Control via Software Using Ethernet (RJ45)

Maximum SPL (calculated)

RMS: 136dB | Peak: 142dB (Full-Space)

Low Frequency Driver

2 x 10" / 3" VC, Neodymium, B&C Custom Speaker

High Frequency Driver

1 x 1.4" Neodymium Coaxial Ring Radiator Driver (MF: 3" VC | HF: 2" VC)

Audio Signal Inputs

Analog | AES (AESOP)

Input Connectors

1 x XLR | 1 x Neutrik EtherCON

Audio Signal Outputs

Analog | AES (AESOP) 32kHz - 196kHz

Output Connectors

1 x XLR | 1 x Neutrik EtherCON®

Protections

Clip Limiter | Temperature | Over Current | DC Protection | HF Protection

Cooling Type

Convection with External Aluminum Heat Sink

Power Supply

UREC Universal Mains Switch Mode Power Supply (SMPS) with Power Factor Correction (PFC) and Standby Converter

Power Input

AC 100V - 240V 50Hz/60Hz

Mains Connector

Dual (IN/OUT) Neutrik powerCON TRUE1 TOP®

Power Consumption

500W

Recommended Subwoofer

LAs518A

Fittings

3-Point Adjustable Rigging System (0º to 10º with 1º Step)

Handles

1 on Each Side, 2 on the Back

Grille

Black Perforated Steel

Construction

15mm Multi-Laminate Birch Plywood

Finish

Semi-Matte Black Textured Coating

Dimensions (WxHxD)

720 x 350 x 550 mm (28.3 x 13.8 x 21.7 in)

Net Weight

33kg (72.8lb)