DAP NRG-10 Passive 10” full-range speaker
The DAP NRG-10 is a passive full-range loudspeaker rated at 550 watts peak (150 watts continuous RMS). It uses a 10” woofer and a 1” compression driver. With a sensitivity of 94 dB/W/m, the NRG-10 comfortably plays up to 115 dB with peaks of up to 127 dB. The compression driver is coupled to a rotatable horn with a directivity of 90°x 60°. The woofer has a low cut-off point of 70 Hertz (-6 dB).
The sturdy, lightweight plywood cabinet has a double-angled top hat (0° and 5°), allowing you to point the cabinet downwards when mounting it on a pole. It uses 4-pole speaker in and thru connectors and offers an additional 4-pin terminal connector, which is especially useful for permanent installation applications. To get the most out of the NRG-10, we recommend using a 4th order high-pass filter at 50 Hertz and adding an NRG series subwoofer.
Inputs
RMS Input Power
150 W
Peak Input Power
550 W
Passive Input Connection
Speaker Connector 4 pole , Terminal
Outputs
Passive Output Connector
Speaker Connector 4 pole
Audio Specifications
Speaker System
2-way
Speaker Sensitivity (1 W/1 m)
94 dB
Speaker Impedance
8 Ω
Maximum SPL at 1 m
115 dB
Frequency Response (-6 dB) Minimum
70 Hz
Frequency Response (-6 dB) Maximum
20000 Hz
Woofer Diameter
10 "
Woofer Voice Coil Diameter
2 "
Woofer Magnet Type
Ferrite
Compression Driver Diameter
1 "
Compression Driver Voice Coil
1.4 "
Compression Driver Magnet Type
Ferrite
Dispersion Angle (Horizontal)
90 °
Dispersion Angle (Vertical)
60 °
Mechanical Specifications
Height (mm)
550 mm
Width (mm)
322 mm
Depth (mm)
320 mm
Material
Plywood
Weight
12.5 kg
IP Rating
IP20 (indoor use only)
Colour
Black
Finish
Painted
Speaker Adapter Diameter
35 mm
Product Properties
Useable as Monitor/Wedge
No
Speaker Grille Material
Steel
Speaker Handle Positions
Left side, Right side
Rigging
Rigging Eye Thread
M10
Thermal Specifications
Maximum Ambient Temperature
40 °C