Remote Control for

1223200032 Dotz Par
1226100279 5P Hex
1226100291 5P Hex Pearl
1226100290 12P Hex

- Battery powered wireless DMX transceiver (transmitter/receiver in one)
- Battery Life: Up to 20 hours
- Battery life and WIFLY wireless signal strength indicators on side panel
- Magnetic bottom plate for temporary, quick and easy mounting to metal fixtures or objects
- Compatible with all ADJ WiFLY products
- Up to 2.500 wireless feet/760m (open line of sight)

- Compact LED Pinspot with ACL lens for a tight, razor sharp beam
- 2 additional fresnel lenses of 10 & 45 degree included
- 4-button LED display on rear panel
- Flicker-free operation for film and television
- Strobe effect
- Electronic Dimming: 0 - 100%
- Beam angle: 4°
- 15-Watt Warm White LED
- 2 DMX Channel modes

Remote Control for :
Flat PAR CWWW9
Flat PAR CWWW18
Flat PAR QA5
Flat PAR QA5X
Flat PAR QA12
Flat PAR QA12X
Flat PAR QWH5
Flat PAR QWH5X
Flat PAR QWH12
Flat PAR QWH12X
Mega QA PAR 38
VBAR PAK
VPAR PAK

- Light source: 100W COB (Chip On Board) UV LED engine
- Control: DMX(1/2/3ch), Sound-active, Manual
- Led Pulse/Strobe Effect/Dimmer
- Size: 320 x 278 x 200mm
- Weight: 4.98kgs

- 15-Watt LED (4-in-1) Quad RGBW LED
- 11 DMX Channel modes
- Compact LED Pinspot with ACL lens for a tight, razor sharp beam
- 2 additional fresnel lenses included (10° & 45°)
- 4-button LED display on rear panel
- Smooth RGBW color mixing
- Beam angle: 4-degree

-Saves valuable transport sace by allowing fixtures to be stacked without having to be boxed.
-Extra wide mouth design allows gear to be removed quickly and easily.

L: 470mm x 410mm x 270mm

- High output slim low profile Par fixture with one TRI (3-IN-1) RGB COB LED
- COB Technology (Chip On Board) produces powerful, smooth RGB color mixing with rich palettes of color
- Use as Wash/PAR or Pixel Mapped for a stunning visual effect
- 5x Operational modes: Auto Run, Sound Active, Color Macro, Dimmer, and DMX Controlled Mode
- 4 DMX channel modes: 3, 4, 5 or 9 channel
- Intelligently designed, patent pending power & DMX Ins/Outs sit sideways so the unit can be set flat on the ground or set inside truss
- Built-In preset colors and programs
- Flicker Free operation (No flickering on camera)
- 35 built-in Color Macros
- LED pulse and strobe effect
- Electronic Dimming: 0 - 100%
- 5 selectable Dim Curves (Standard, Stage, TV, Architectural & Theatre)
- Beam angle: 60-degrees (25-degrees with supplied lens kit)
- 3-pin XLR chassis mount connectors for DMX linking
- IEC AC IN/OUT to daisy chain power (up to 13 Dotz Par’s @ 110V and 28 Dotz Par’s @ 230V)

optics
• 80-degree beam angle
• Includes lens kit to change to 40° or 50° beam angle
• Color Temperature: 2300~9900K
Source
Source
• 1x 200-Watt RGBAL COB LED
• Lumen: 4084
• CRI: 90

- 4 x 10-Watt
- RGBA LEDs
- Battery Life: 14 hours (When color changing in Battery Saver Mode 14); 40 hours (When set to a single color in Battery Saver Mode 14)
- IP65 Rated for temporary outdoor use
- Sold in a system of six portable LED battery powered fixtures inside a charging flight case.

- 4 x 10-Watt
- RGBA LEDs (4-in-1 - Red, Green, Blue & Amber)
- Battery Life: 14 hours (When color changing in Battery Saver Mode 14); 40 hours (When set to a single color in Battery Saver Mode 14)
- IP65 Outdoor Rated
- Sold in a system of six portable LED battery powered fixtures inside a charging flight case.

High quality fog juice with CO2 Boost effect.

This special formulated fog juice is giving you a CO2 effect like in large discos and clubs. In an environment of around 20°C it disappears within a few seconds. It’s great for stage effects and show specials. It works with any regular fog machines.

ADJ recommends the use powerful fog machines to create the boost-effect.

- 1100W mobile Fog Machine
- High efficiency heater block burns through fog with less residue
- Electronic Thermo Sensing (ETS) for optimum heating levels
- Low fog fluid shut off sensor to protect pump
- Warm-up time: 7 minutes
- Output: 12,000 cubic ft. per min
- External fog fluid tank: 2.3 Liter
- Compatibel with the wired Timer Remote VFTR13 from ADJ
- ADJ VF5PR wired remote and VFWR2 wireless remote included
- Fog output switch on rear panel
- Only use high quality, water based fog fluid
- Dimensions (LxWxH): 400x290x320mm
- Weight: 4.88 kg

Fog Fury Jett is a high velocity vertical Fog Machine that mixes color into the fog from 12 x 3Watt LEDs
- Optical: 12 x 3-Watt LEDs (3 Red, 3 Green, 3 Blue, 3 Amber)
- Output: 566 m3 Per minute
- Heater: 700 Watts
- Heat Up Time: 9 min
- Fluid Type: Water Based Fog Fluid

- Fog Fury Jett Pro is a high velocity vertical Fog Machine that mixes color into the fog from 28x 3-Watt LEDs
- Optical: 28 x 3-Watt LEDs (6 Red, 7 Green, 6 Blue, 3 Amber & 6 UV LEDs)
- Output: 40,000 Cubic Feet/1.132m3 Per minute
- Heater: 1450 Watts
- Heat Up Time: 9 min
- Fluid Type: Water Based Fog Fluid
- Fluid Consumption: 150ml/min
- On board control or Wireless DMX

450W Faze Machine with DMX protocol
Rapid Heater Technology - ready to use in 45 seconds
Uses standard water based fog fluid
Haze Output: 4000 cubic feet per min (fan and volume full on)
Fluid Consumption: 4,5ml. per min.
Automatic circuit cut-off to protect pump if fog fluid tank runs dry
Tank Capacity: 3-liter
DMX Channels: 1, 2 or 4-channel mode
Connection: 3-pin XLR In/Out
Digital display with on-board controls
Power Consumption: 465W
On/Off Switch
Faze trigger switch
Safety eye

Media Operator BT

18-inch, active Subwoofer

Frequency Range (-10db): 35Hz-150Hz

Nominal Coverage: Omni-direction, Cardioid

Output (Peak SPL @1M): 127dB

Amplifier Power: 1600 W Dynamic, 500W RMS Class D

Power Consumption: 600W

DSP Features: LCD screen with EQ and multiple presets

Driver Information: 18” Woofer w/3” Voice Coil.

Input /Output Connectors: 2 x Balanced female

Optional Casters for Avante A15S and A18S Subwoofers, Set of 4 wheels with brake

Trasnport Cover for Avante A10 Speaker

Trasnport Cover for Avante A12 Speaker

Trasnport Cover for Avante A15 Speaker

Trasnport Cover for Avante A15S Speaker

Trasnport Cover for Avante A18S Speaker

Trasnport Cover for Avante A15SC Speaker

Trasnport Cover for Avante A18SC Speaker

Set of 4 linkpins for the Avante Imperio Series. Linkpins are used when flying Imperio system with Imperio subwoofer(s) and Flybar LG or to connect 2 subwoofers in ground stacking.

1 set of 4 pcs. needed for each connection (i.e. when flying 1 subwoofer with Imperio Top underneath, 2 Flybar Lg are needed, as well as 2 sets of LinkPin4. Add 1 set more if 2 subs are flown per side.