CEILING OR IN-WALL SUBWOOFER - 100W/8OHM - RAL9010

EVACUATION LED FOR CSE55

-Speaker type: Broadband
-RMS Power: 15 W
-Impedance: 8 Ohms
-Sensitivity (1W/1m): 90 dB
-Sound Pressure (Max. W/1m): 100.8 dB

(10) CEILING SPEAKER WITH FIREDOME 6W/100V - RAL9010

The CSK100 is an optional suspension kit, allowing the NELO series loudspeakers being used as a pendant loudspeaker solution. The triangular steel wire construction can be screwed into the threaded bushings on the rear side of the NELO series speakers, while a 3.5 meters long steel wire allows it to be fixed to any possible ceiling or surface.

(10) EVACUATION QUICK FIT CEILINGSPEAKER, 6W/100V + WHITE LED

The CTA845 cable test adapter features a 8-pin terminal block connector (3.5 mm pitch) on one side and a female RJ45 connector on the other side. Both connectors are parallel connected, allowing twisted pair peripheral expansion cabling being tested with standard RJ45 cable testers. This will avoid wrong wiring causing failure and damage to equipment.

The DMP42 is a professional DAB/DAB+ & FM tuner featuring SourceCon modular technology. This unique technology guarantees true plug & play implementation to any compatible device. When inserted to a supporting slot, the module is instantly installed, discovered and ready for operation without requiring any additional internal wiring or complex configuration.

The DPA616 is a professional sixteen channel power amplifier which is capable of delivering a power of 60 Watt to 4 Ohm loads connected to the 16 output channels. When used in bridge mode, it can deliver a power of 120 Watt to 8 Ohm loads connected to the 8 bridged outputs. This way, the DPA616 is the perfect solution for installed multi-zone audio distribution systems with 8 or 16 zones.

This

A connection cable with conductors and a steel suspension and safety wire in a single outer jacket. This offers the cleanest and most elegant solution for connecting and mounting the loudspeaker. This professional connection cable with two integrated steel cores for suspending adds an additional drop safety for the loudspeaker. Fixation is made through two snap-hooks on one end and a dual Grippl

A connection cable with conductors and a steel suspension and safety wire in a single outer jacket. This offers the cleanest and most elegant solution for connecting and mounting the loudspeaker. This professional connection cable with two integrated steel cores for suspending adds an additional drop safety for the loudspeaker. Fixation is made through two snap-hooks on one end and a dual Grippl

A connection cable with conductors and a steel suspension and safety wire in a single outer jacket. This offers the cleanest and most elegant solution for connecting and mounting the loudspeaker. This professional connection cable with two integrated steel cores for suspending adds an additional drop safety for the loudspeaker. Fixation is made through two snap-hooks on one end and a dual Grippl

A connection cable with conductors and a steel suspension and safety wire in a single outer jacket. This offers the cleanest and most elegant solution for connecting and mounting the loudspeaker. This professional connection cable with two integrated steel cores for suspending adds an additional drop safety for the loudspeaker. Fixation is made through two snap-hooks on one end and a dual Grippl

A connection cable with conductors and a steel suspension and safety wire in a single outer jacket. This offers the cleanest and most elegant solution for connecting and mounting the loudspeaker. This professional connection cable with two integrated steel cores for suspending adds an additional drop safety for the loudspeaker. Fixation is made through two snap-hooks on one end and a dual Grippl

A connection cable with conductors and a steel suspension and safety wire in a single outer jacket. This offers the cleanest and most elegant solution for connecting and mounting the loudspeaker. This professional connection cable with two integrated steel cores for suspending adds an additional drop safety for the loudspeaker. Fixation is made through two snap-hooks on one end and a dual Grippl

- 2 X 150w RMS @ 4 OHM Stereo
- 2 X 80w RMS @ 8 OHM Stereo
- 1 X 300w RMS @ Bridge
- Class D versteker
- 4.100 kg
- 482 x 44 x 330 mm
- DC Short circuit
- Over heating
- Over load
- Signal limiting
- Input XLR female with Male Linkthrough
- Output: Speakon compatible & 2-pin Euro Terminal Block (5.08 mm)

- 2 x 250W RMS @ 4 OHM Stereo
- 2 x 130W RMS @ 8 OHM Stereo
- 500W RMS @ 8 OHM
- Signal to noise ratio > 90 dB
- Class-D
- 4,4 Kg
- DC Short-circuit
- Over heating
- Over load
- Signal limiting
- 482 x 44 x 330 mm
- Input: XLR input & signal linkthrough
-Output: Speakon compatible & 2-pin terminal

- 4 x 250W RMS @ 4 OHM Stereo
- 2 x 130W RMS @ 8 OHM Stereo
- 2 x 500W RMS @ 8 OHM Bridge
- Signal to noise ratio > 90 dB
- Class-D
- 4,7 Kg
- DC Short-circuit
- Over heating
- Over load
- Signal limiting
- 482 x 44 x 330 mm
- Input: XLR input & signal linkthrough
-Output: Speakon compatible & 2-pin terminal

- 2 x 500W RMS @ 4 OHM Stereo
- 2 x 300W RMS @ 8 OHM Stereo
- 1000W RMS @ 8 OHM
- Signal to noise ratio > 90 dB
- Class-D
- 4,7 Kg
- DC Short-circuit
- Over heating
- Over load
- Signal limiting
- 482 x 44 x 330 mm
- Input: XLR input & signal linkthrough
-Output: Speakon compatible & 2-pin terminal

-MP3, WMA, WAVE, FLAC, OGG
-15 trigger contact inputs
-Pulse / contact & event triggering
-Priority / repeat selectable
-USB drive playback

- High output 18” subwoofer cabinet
- Horn loaded system
- Multifunctional carry handles for easy handling
- Metal frame for safe & easy rigging
- 18 mm solid plywood enclosure construction
- Weatherproof Dura Coat texture paintwork
- IPx5 Ingress protection

- High output 3-way active driven system
- Horn loaded system
- Multifunctional carry handles for easy handling
- Metal frame for safe & easy rigging
- 90° x 40° Rotatable horn
- 18 mm solid plywood enclosure construction
- Weatherproof Dura Coat texture paintwork
- IPx5 Ingress protection

-Dimensions: 336 x 34.5 mm (Ø x D)
-Cut-out measurement: 340 mm (Ø)
-Weight: 1.71 kg
-Construction: Gypsum

DESIGN COLUMN SPEAKER 4 OHM240W RMS - WHITE

(4) FRONT GRILL FOR CELO2 - RAL9005 - BLACK

(4) FRONT GRILL FOR CELO2 - PAINTABLE

(4) FRONT GRILL FOR CELO2 - RAL9003 - WHITE

(4) FRONT GRILL FOR CELO5 - RAL9005 - BLACK

(4) FRONT GRILL FOR CELO5 - PAINTABLE

(4) FRONT GRILL FOR CELO5 - RAL9003 - WHITE