- Mic Unit: Dynamic
- Polar Pattern: Unidirectional
- Freq. Response: 40 Hz–15 kHz
- Sensitivity (2.83 V/1 m): -54dB ±3dB (0 dB=1V/Pa at 1 kHz)
- Output Impedance: 500 ohms ±30% (at 1 kHz)
- Connector: 3 pin XLR-M type
- Cable: Φ6mm x 5m cable with XLR-F type connector and 6.3mm plug

The DME7 is an open architecture-type digital signal processor that boasts superior processing capacity and supports up to 256 input/output channels. Featuring 96-kHz processing, the DME7 delivers the high-quality sound of Yamaha digital mixers. It is an outstanding processor for both musical expression and sound field generation, giving you the ideal sound whether you are using it for a theater, concert hall, or a wide range of other venues

1100W, column-type powered speaker with easy-to-use 2 channel mixer, 12" subwoofer, 1.5" x 10 line array speaker, Link in/out for extension of a Stagepas 1K MKII system

- 1100W power output
- Biggest in the class 12-inch subwoofer for low frequency
- 1.5-inch x10 slim line array speaker for high frequency
- Easy-to-use 2-Channel Mixer
- Link in/out for expanding system
- Dedicated cover included
- Optional dolly (DL-SP1K) for more portability

YAMAHA POWERED SPEAKER SYSTEM DXR10MKII - DXR10MKII E

YAMAHA POWERED SPEAKER SYSTEM DXR12MKII - DXR12MKII E

YAMAHA POWERED SPEAKER SYSTEM DXR15MKII - DXR15MKII E

YAMAHA POWERED SPEAKER SYSTEM DXR8MKII - DXR8MKII E

YAMAHA POWERED SPEAKER SYSTEM DXS12MKII - DXS12MKII E

YAMAHA POWERED SPEAKER SYSTEM DXS15MKII - DXS15MKII E

YAMAHA POWERED SPEAKER SYSTEM DXS15MKII - DXS15MKII B

-Powered 15” subwoofer with 4” Voice Coil
-Maximum 136dB SPL and 33Hz-150Hz frequency range
-High power 1600W Class-D amplifier module
-96kHz DSP and FIR filter for true high-definition sound, low latency
-Equipped with D-XSUB processing and cardioid mode capability
-Lightweight yet very durable plywood cabinet with premium grade Polyurea coating

-Powered 18" subwoofer with 4" Voice Coil
-Maximum 136dB SPL and 30Hz-150Hz frequency range is ideal for today’s sound engineering demands
-High power 1600W Class-D amplifier module
-96kHz DSP for true high-resolution sound with super low latency
-Equipped with Dante I/O (2in/2out) and features SRC (sample rate conversion) allowing 48kHz device compatibility

-Powered 18” subwoofer with 4” Voice Coil
-Maximum 136dB SPL and 33Hz-150Hz frequency range
-High power 1600W Class-D amplifier module
-96kHz DSP and FIR filter for true high-definition sound, low latency
-Equipped with D-XSUB processing and cardioid mode capability
-Lightweight yet very durable plywood cabinet with premium grade Polyurea coating

-2-way powered loudspeaker with a 2” HF and a 10" LF
-Maximum 137dB SPL and 44Hz-20kHz frequency range
-High power 2000W Class-D amplifier module
-96kHz DSP and FIR filter for true high-resolution sound with super low latency
-Features Advanced FIR-X tuning, the combination of FIR filtering and correct EQ for minimizing phase distortion
-D-Contour and highly reliable protection circuits

-2-way powered loudspeaker with a 2” HF and a 12" LF
-Maximum 139dB SPL and 39Hz-20kHz frequency range
-High power 2000W Class-D amplifier module
-96kHz DSP and FIR filter for true high-resolution sound with super low latency
-Features Advanced FIR-X tuning, the combination of FIR filtering and correct EQ for minimizing phase distortion
-D-Contour and highly reliable protection circuits

-3-way powered loudspeaker with a 2” HF, an 8 ” MF and a 15" LF
-Maximum 143dB SPL and 31Hz-20kHz frequency range
-High power 2000W Class-D amplifier module
-96kHz DSP and FIR filter
-Features Advanced FIR-X tuning, the combination of FIR filtering and correct EQ for minimizing phase distortion
-D-Contour and highly reliable protection circuits

-3-way powered loudspeaker with a 2" HF, an 8" MF and a 15" LF
-Maximum 143dB SPL and 31Hz-20kHz frequency range is ideal for FOH main PA
-High power 2000W Class-D amplifier module
-96kHz DSP and FIR filter for true high-resolution sound with super low latency
-Features Advanced FIR-X tuning, the combination of FIR filtering and correct EQ for minimizing phase distortion

-3-way powered loudspeaker with a 2” HF, an 8 ” MF and a 15" LF
-Maximum 143dB SPL and 31Hz-20kHz frequency range
-High power 2000W Class-D amplifier module
-96kHz DSP and FIR filter
-Features Advanced FIR-X tuning, the combination of FIR filtering and correct EQ for minimizing phase distortion
-D-Contour and highly reliable protection circuits

-80Hz highpass filters for eliminating low-frequency noise and rumble
-Channel ON switches let you switch individual channels into or out of the mix -PFL (Pre-Fader Listen) switches allow isolated monitoring of individual channels

EXI8 - YAMAHA INPUT EXPANDER - EXI8 B

HCB-L1B BLACK - YAMAHA SPEAKER ACCESSORY - HCB-L1B

-40 mm custom drivers with CCAW voice coils deliver a broad frequency range from 20Hz to 20kHz
-Closed-back, circumaural design for excellent isolation
-250g light weight, smooth synthetic leather and low-resistance cushions ensure stress-free wearability
-Three-dimensional arm pivot construction and adjustable slider length alleviate fatigue when working for extended periods

- 5" Woofer (45 W) + 1" Tweeter (25 W)
- 70 W biamp
- Bass reflex system
- Freq. range: 54 Hz - 30 kHz
- XLR input, balanced
- 6.3 mm jack input, balanced
- Adjustable input level
- Room control and high trim response control

- 5" Woofer (45 W) + 1" Tweeter (25 W)
- 70 W biamp
- Bass reflex system
- Freq. range: 54 Hz - 30 kHz
- XLR input, balanced
- 6.3 mm jack input, balanced
- Adjustable input level
- Room control and high trim response control

- 6.5" Woofer (60 W) + 1" Tweeter (35 W)
- Bass-reflex system
- Power: 95 W
- Bi-Amp
- Freq. range: 43 - 30,000 Hz
- Inputs: XLR and 6.3 mm jack, both balanced
- Adjustable input level
- Room Control and High-Trim tone control

- Aansluitingen luidspreker: 6.3 mm TRS input, XLR input
- Actief of passief: actief
- Coaxiaal: Nee
- Diameter mid driver/woofer: 6.5 inch
- Diameter tweeter: 1 inch
- Max. frequentie: 29 - 31.9 kHz
- Min. frequentie: 40 - 49 Hz
- Monitor set: enkele speaker
- RMS vermogen in Watt: 50 - 99 Watt
- Type studio monitor: 2-weg (tweeter + woofer)

-2-way bass-reflex bi-amplified nearfield studio monitor with 8" cone woofer and 1" dome tweeter
-38Hz - 30kHz (-10dB), 47Hz - 24kHz (-3dB) frequency response
-75W LF plus 45W HF bi-amp system for high-performance 120W power amplification
-ROOM CONTROL and HIGH TRIM response controls
-XLR and TRS phone jack inputs accept balanced or unbalanced signals
-Mounting points on 4 surfaces

- 150 Watt
- Freq. response: 22 Hz - 150 Hz
- Low-cut switch
- Low-cut control (80 - 120 Hz)
- High-cut control (80 - 120 Hz)
- Phase switch
- Inputs: XLR
- Outputs: XLR L / R and XLR for external sub

- 150 Watt
- Freq. response: 22 Hz - 150 Hz
- Low-cut switch
- Low-cut control (80 - 120 Hz)
- High-cut control (80 - 120 Hz)
- Phase switch
- Inputs: XLR
- Outputs: XLR L / R and XLR for external sub