Folding, short-legged design with die-cast base. Noiseless height-adjustment. - Weight: 2.0 kg, H: 890/1590 mm.

Classic tow-piece telescopic boom arm with 3/8" thread. Silent, scratchless swivel joint for adjustment of angle, easy tightening with T-bar locking screw. - Weight: 0.64 kg, BL: 435/745 mm.

Classic one-piece boom arm with 3/8" thread, and sliding adjustment through non-scratching swivel joint. Easy tightening with T-bar locking screw. Complete with locking washer and plastic handgrip. - Weight: 0.7 kg, BL: 800 mm.

The industry standard for a mic stand and boom arm combination. Package consists of the 201A/2 microphone stand and the 211 boom arm. Folding base for ease of transport. Long legs for added stability. The 210/2 - a classic for 30 years. More than 2 million sold. - Weight: 3.2 kg, H: 900/1605 mm, BL: 800 mm.

Boom arm:2-piece telescopic design
Boom arm clamping:T-bar locking screw
Boom arm length:from 435 to 745 mm
Height:from 900 to 1,605 mm
Height adjustment:clutch
Leg construction:socket with foldable legs
Material:steel
Product Category:Topline
Rod combination:2-piece folding design
Size when folded:105 x 85 x 985 mm
Special features:stable and sturdy; zinc die-cast base
Threaded connector:3/8"
Type:black
Weight:3.1 kg

Extra low design for bass drums or special use. Very short and heavy legs provide maximum stability. Legs are foldable for easy transport. Comes with two-piece boom arm 21140. - Weight: 2.98 kg, H: 280 mm, BL: 425/725 mm.

Low-level, telescopic stand with foldable legs. Comes with 2-piece boom arm. - Weight: 2.2 kg, H: 425/645 mm, BL: 435/745 mm.

The new star in your show!
The avant-garde, one-hand microphone stand is setting new standards in design and function. The elegant combination of triangular-shaped sections and the new design of the slender one-hand adjustment mechanism go harmoniously with standard microphone clips and microphones. The integrated knurled screw is impossible to lose and makes tightening and positioning the micro

Perfect presentation and function: this heavy duty, large round base microphone stand is impressive both for the studio and on stage. The robust and tall tubing combination with the slim clutch provide a very tight and secure connection. A full circle anti-vibration rubber damping ring prevents unwanted floor vibration impacting the sound. The formidable base scores additional points for its clea

The practical one-hand microphone stand ¯Performance® impresses through its reliability and functionality. The stable combination of high quality round-shaped rods and the elegant one-hand adjustment present a harmonious overall appearance. Also in connection with the classic K”nig & Meyer expandable boom, the stand's elegant design is not diminished in any way. With the practical one-hand system

Especially designed for studios and drummers. Taller and longer than most stands. Long legs fold for compact storage and easy transport. - Weight: 5.9 kg, H: 1120/2010 mm, BL: 1065 mm.

Inexpensive, handy table microphone stand for professional use. Sturdy plastic base with collapsible light-weight plastic legs and 3/8" thread. - Weight: 0.1 kg, H: 70 mm.

Sound-absorbing cast-iron base with black powder-coated screw-in rod, 3/8" thread. - Weight: 1.4 kg, H: 175 mm, base-diameter: 130 mm.

Black rectangular cast-iron base with tilt angle adjustment, 2-piece adjustable extension tubing with non-marring height-adjustment mechanism. Ideal for drums and studios. - Weight: 2.1 kg, H: 400/640 mm.

Beautifully designed, compact, zinc die-cast base. 3-pin XLR connections (male/female), completely mounted, crackle-free switching, with phantom powering-pilot light, with pushbutton "push-to-talk" (black). Two diodes indicate the operating state (voltage / microphone ON/OFF). - Weight: 0.5 kg, dimensions: Diameter 130 mm, H: 35 mm.

Black cast-iron base with a horizontally mounted XLR-style female socket on upper face. Removable plate, suitable for fitting switches, indicators, controls or connectors, with access to space for additional circuitry. Base is fitted with rear-mounted 3-pole XLR male connector. - Weight: 2.4 kg, dimensions: 160 x 150 x 51 mm.

3/8" female threading with lateral cable entry terminating in a 3 pole bushing with NC3FX XLR spring bushing. - L: 300 mm, diameter: 15 mm.

3 pole plug NC3MX XLR terminating in a 3 pole bushing with NC3FX XLR spring bushing. - L: 300 mm, diameter: 15 mm.

3/8" female and male thread. - L: 200 mm, diameter: 11 mm.

3/8" female and male thread. - L: 500 mm, diameter: 18.5 mm.

3/8" female and male thread. - L: 600 mm, Diameter: 18.5 mm.

Suitable for microphone arm 23850 and 23860. -

The large Popkiller for modern studio engineering. The large 200 mm nylon screen guarantees optimum sound filtering during studio recording. The Popkiller with flexible gooseneck can be screwed to all standard microphone stands (rod diameter max. 30 mm). - Weight: 0.32 kg, gooseneck length: 330 mm, gooseneck diameter: 8 mm, screen diameter: 200 mm.

Unique, compact holder to attach microphones to drums. Easy to mount and remove. Rubber inserts absorb noise and shock. No parts to lose. Tightens securely. With 3/8" thread. - Weight: 0.1 kg, H: 60 mm.

Compact holder to attach microphones to drums, esp. bass drums. The microphone can be slided up to 70 mm on the mounting rail and placed very near to the drum. Easy mounting, no parts to lose. Rubber washer and inserts absorb noise and shock, "R.I.M.S" suitable. With 3/8" thread. - Weight: 0.12 kg, L: 115 mm.

Connects to top of mic stands for holding 2 microphones or boom arms. 3/8" locking screws, adjustable from 60 to 172 mm. - Weight: 0.1 kg, L: 200 mm.

Connects to top of mic stands for holding 4 microphones or boom arms. 3/8" locking screws. - Weight: 0.4 kg, L: 365 mm.

Tapered slip-in microphone clip diameter 22-28 mm, high quality elastic rubber. - 3/8" and 5/8"

Tapered slip-in microphone clip diameter 28-34 mm, high quality elastic rubber. - 3/8" and 5/8"

Tapered slip-in microphone clip diameter 34-40 mm, high quality elastic rubber. - 3/8" and 5/8"

215 - Thread adapter - 1/2" and 3/8" female thread, 5/8" 27 gauge male thread. -

5/8" 27 gauge female thread, 3/8" male thread. -