Format A

?The AV-LN4 is an interface that converts four line-level XLR inputs to Dante network audio channels. Special software is not required to configure the AV-LN4. A dual-LED VU meter displays the level for each. The AV-LN4 is a professional grade product for studio quality fidelity and low noise performance.

The AV-LN4 may be powered from an external 24 Vdc power supply, available separately.

The AV-NH1 is a headphone amplifier that converts two Dante network audio channels to a stereo headphone output with front-panel level adjustment. The outputs connect through a stereo 3.5 mm Mini-jack or ¼” (6.35 mm) jack. Each channel provides 100 mW into 100 ohms for a network digital audio level of 0 dBFS. Special software is not required to configure the module.

Converts Two Dante Network Audio Signals to Balanced Analog
Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Each Output Switch-Selectable for Mic or Line Level
Normal (-20 dBFS) Line-Level Output is +4 dBu with 20 dB Headroom
Microphone Output Level is Attenuated 50 dB
Each Output is Protected Against Phantom Voltage up to 48 Vdc

?Converts Four Dante Network Audio Signals to Balanced Analog
Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Each Output Switch-Selectable for Mic or Line Level
Normal (-20 dBFS) Line-Level Output is +4 dBu with 20 dB Headroom
Microphone Output Level is Attenuated 50 dB
Each Output is Protected Against Phantom Voltage up to 48 Vdc

Dante Network Interface for Four Audio Mic Inputs
Each XLR Input Provides Switch-Selectable Mic Gain: 40 dB, 48 dB or 62 dB
48 V Mic Phantom (P48) on each input
Four XLR Front-Panel Inputs
Converts Four Standard XLR Mic Audio Sources to Dante Network Channels
Special Software Not Required for Module Setup
High Resolution 24 Bit Analog to Digital Conversion

Dante Network Interface for Two Audio Inputs and Two Audio Outputs
Inputs and Outputs on XLR Jacks on front panels
Converts Two Standard Mic or Line Audio Sources to Dante Network Channels
Converts Two Dante Network Audio Signals to Mic or Line Level
Special Software Not Required for Module Setup
Each Input is Switch Selectable for Mic or Line
Switch-Selectable Mic Gain: 40 dB, 48 dB or 62

Dante Network Interface for Two Audio Inputs and Two Audio Outputs
XLR and Mini-jack Front-Panel Inputs; Outputs on Rear-Panel Terminal Block
Converts One Mic or Line and One Consumer Line Audio Source to Dante Network Channels
Converts Two Dante Network Audio Signals to Line Level
Special Software Not Required for Module Setup
XLR Input is Switch Selectable for Mic or Line

Dante Network Interface for Four Audio Inputs and Four Audio Outputs
One Mini-jack and Two XLR Front-Panel Inputs
One Mini-jack Front-Panel Output; Two Outputs on Rear-Panel Terminal Block
Converts Two Standard XLR Mic or Line Audio Sources to Dante Network Channels
Each XLR Input is Switch Selectable for Mic or Line
Switch-Selectable Mic Gain: 40 dB, 48 dB or 62 dB

Bluetooth Audio Input for Dante Networked System
Consumer Audio Inputs on Mini-Jack or RCA Jacks
Return Audio Talk Channel from Dante Network to Bluetooth Connected Device
Consumer Audio Outputs on Mini-Jack
Balanced and Unbalanced Audio Line Outputs on Rear Panel
Intuitive Single Button Bluetooth Pairing with LED Status Indication
Special Software Not Required for Module Setup

Dante Network Interface for Two Audio Inputs and Two Audio Outputs
Inputs and Outputs on XLR Jacks on front panels
Converts Two Standard Mic or Line Audio Sources to Dante Network Channels
Converts Two Dante Network Audio Signals to Mic or Line Level
Special Software Not Required for Module Setup
Each Input is Switch Selectable for Mic or Line
Switch-Selectable Mic Gain: 40 dB, 48 dB or 62

Dante Network Interface for Two Audio Inputs and Two Audio Outputs
Inputs on Front-Panel XLR Jacks; Outputs on Rear-Panel Terminal Block
Converts Two Standard Mic or Line Audio Sources to Dante Network Channels
Converts Two Dante Network Audio Signals to Line Level
Special Software Not Required for Module Setup
Each Input is Switch Selectable for Mic or Line

Dante Network Interface for Two Audio Inputs and Two Audio Outputs
XLR and Mini-jack Front-Panel Inputs; Outputs on Rear-Panel Terminal Block
Converts One Mic or Line and One Consumer Line Audio Source to Dante Network Channels
Converts Two Dante Network Audio Signals to Line Level
Special Software Not Required for Module Setup
XLR Input is Switch Selectable for Mic or Line

Dante Network Interface for Four Audio Inputs and Four Audio Outputs
One Mini-jack and Two XLR Front-Panel Inputs
One Mini-jack Front-Panel Output; Two Outputs on Rear-Panel Terminal Block
Converts Two Standard XLR Mic or Line Audio Sources to Dante Network Channels
Each XLR Input is Switch Selectable for Mic or Line
Switch-Selectable Mic Gain: 40 dB, 48 dB or 62 dB

Dante Network Interface for Four Audio Inputs and Four Audio Outputs
One Mini-jack and Two XLR Front-Panel Inputs
One Mini-jack Front-Panel Output; Two Outputs on Rear-Panel Terminal Block
Converts Two Standard XLR Mic or Line Audio Sources to Dante Network Channels
Each XLR Input is Switch Selectable for Mic or Line
Switch-Selectable Mic Gain: 40 dB, 48 dB or 62 dB

Dante Network Interface for Four Audio Inputs and Two Audio Outputs
Four XLR Front-Panel Inputs
Converts Four Standard XLR Mic or Line Audio Sources to Dante Network Channels
Each XLR Input is Switch Selectable for Mic or Line
Switch-Selectable Mic Gain: 40 dB, 48 dB or 62 dB
Switch-Selectable 48 V Mic Phantom (P48)
Switch-Selectable Line Gain: Unity, 12 dB or 19 dB

Bluetooth Audio Input for Dante Networked System
Consumer Audio Inputs on Mini-Jack or RCA Jacks
Return Audio Talk Channel from Dante Network to Bluetooth Connected Device
Consumer Audio Outputs on Mini-Jack
Balanced and Unbalanced Audio Line Outputs on Rear Panel
Intuitive Single Button Bluetooth Pairing with LED Status Indication
Special Software Not Required for Module Setup

Dante Network Interface for Two Audio Inputs and Two Audio Outputs
Inputs and Outputs on XLR Jacks on front panels
Converts Two Standard Mic or Line Audio Sources to Dante Network Channels
Converts Two Dante Network Audio Signals to Mic or Line Level
Special Software Not Required for Module Setup
Each Input is Switch Selectable for Mic or Line
Switch-Selectable Mic Gain: 40 dB, 48 dB or 62

Dante Network Interface for Two Audio Inputs and Two Audio Outputs
Inputs on Front-Panel XLR Jacks; Outputs on Rear-Panel Terminal Block
Converts Two Standard Mic or Line Audio Sources to Dante Network Channels
Converts Two Dante Network Audio Signals to Line Level
Special Software Not Required for Module Setup
Each Input is Switch Selectable for Mic or Line

Dante Network Interface for Two Audio Inputs and Two Audio Outputs
XLR and Mini-jack Front-Panel Inputs; Outputs on Rear-Panel Terminal Block
Converts One Mic or Line and One Consumer Line Audio Source to Dante Network Channels
Converts Two Dante Network Audio Signals to Line Level
Special Software Not Required for Module Setup
XLR Input is Switch Selectable for Mic or Line

Dante Network Interface for Four Audio Inputs and Four Audio Outputs
One Mini-jack and Two XLR Front-Panel Inputs
One Mini-jack Front-Panel Output; Two Outputs on Rear-Panel Terminal Block
Converts Two Standard XLR Mic or Line Audio Sources to Dante Network Channels
Each XLR Input is Switch Selectable for Mic or Line
Switch-Selectable Mic Gain: 40 dB, 48 dB or 62 dB

Dante Network Interface for Four Audio Inputs and Two Audio Outputs
Four XLR Front-Panel Inputs
Converts Four Standard XLR Mic or Line Audio Sources to Dante Network Channels
Each XLR Input is Switch Selectable for Mic or Line
Switch-Selectable Mic Gain: 40 dB, 48 dB or 62 dB
Switch-Selectable 48 V Mic Phantom (P48)
Switch-Selectable Line Gain: Unity, 12 dB or 19 dB

Bluetooth Audio Input for Dante Networked System
Consumer Audio Inputs on Mini-Jack or RCA Jacks
Return Audio Talk Channel from Dante Network to Bluetooth Connected Device
Consumer Audio Outputs on Mini-Jack
Balanced and Unbalanced Audio Line Outputs on Rear Panel
Intuitive Single Button Bluetooth Pairing with LED Status Indication
Special Software Not Required for Module Setup

Adapts Standard Audio Amplifiers to a Dante Network
Converts Two Dante Network Audio Signals to Professional Line Level
Each Output is Switch-Selectable for Mic or Line Level
Line-Level Outputs Provide +4 dBu with > 18 dB Headroom
Exceptional Low-Noise and Low-Distortion Performance
Crosstalk is Below the Noise Floor
24 Vdc Pass-Through Jack for Power Supply Sharing with RDL Amplifiers

Adapts Standard Audio Amplifiers to a Dante Network
Converts Two Dante Network Audio Signals to Professional Line Level
Each Output is Switch-Selectable for Mic or Line Level
Line-Level Outputs Provide +4 dBu with > 18 dB Headroom
Exceptional Low-Noise and Low-Distortion Performance
Crosstalk is Below the Noise Floor
24 Vdc Pass-Through Jack for Power Supply Sharing with RDL Amplifiers

Adapts Standard Audio Amplifiers to a Dante Network
Converts Two Dante Network Audio Signals to Professional Line Level
Separate VCA Provided for Each Output
Outputs are Adjustable using RDL or OEM Remote Controls or 0 to 10 Vdc
Individually Adjustable Outputs Ideal to Feed Two Separate Amplifiers
Each Output is Switch-Selectable for Mic or Line Level
Line-Level Outputs Provide +4 dBu

Adapts Standard Audio Amplifiers to a Dante Network
Converts Two Dante Network Audio Signals to Professional Line Level
Separate VCA Provided for Each Output
Outputs are Adjustable using RDL or OEM Remote Controls or 0 to 10 Vdc
Individually Adjustable Outputs Ideal to Feed Two Separate Amplifiers
Each Output is Switch-Selectable for Mic or Line Level
Line-Level Outputs Provide +4 dBu

Converts RDL Format-A and Aux Source to Four Dante Network Channels
Easy Installation with Format-A Connections on RJ45 through CATx Cable
Format-A Audio Sources from Pairs A, B and C Converted to Dante
Fourth Dante Audio Channel Fed from Unbalanced or Balanced Aux Line Input
Front-Panel Gain Adjustment with Dual-LED VU Meter for Aux Input

Converts RDL Format-A and Aux Source to Four Dante Network Channels
Easy Installation with Format-A Connections on RJ45 through CATx Cable
Format-A Audio Sources from Pairs A, B and C Converted to Dante
Fourth Dante Audio Channel Fed from Unbalanced or Balanced Aux Line Input
Front-Panel Gain Adjustment with Dual-LED VU Meter for Aux Input

Converts RDL Format-A and Aux Source to Four Dante Network Channels
Easy Installation with Format-A Connections on RJ45 through CATx Cable
Format-A Audio Sources from Pairs A, B and C Converted to Dante
Fourth Dante Audio Channel Fed from Unbalanced or Balanced Aux Line Input
Front-Panel Gain Adjustment with Dual-LED VU Meter for Aux Input

Converts RDL Format-A and Aux Source to Four Dante Network Channels
Easy Installation with Format-A Connections on RJ45 through CATx Cable
Format-A Audio Sources from Pairs A, B and C Converted to Dante
Fourth Dante Audio Channel Fed from Unbalanced or Balanced Aux Line Input
Front-Panel Gain Adjustment with Dual-LED VU Meter for Aux Input

Converts Standard Line-Level Audio Sources to Dante Network Channels
Line-Level Inputs Accept Unbalanced -10 dBV or Balanced +4 dBu Signals with > 18 dB Headroom
Front-Panel Gain Adjustment with Dual-LED VU Meter for Each Audio Input
Converts Two Dante Network Audio Signals to Balanced Line Level
Line-Level Outputs Provide +4 dBu with > 18 dB Headroom

Converts Standard Line-Level Audio Sources to Dante Network Channels
Line-Level Inputs Accept Unbalanced -10 dBV or Balanced +4 dBu Signals with > 18 dB Headroom
Front-Panel Gain Adjustment with Dual-LED VU Meter for Each Audio Input
Converts Two Dante Network Audio Signals to Balanced Line Level
Line-Level Outputs Provide +4 dBu with > 18 dB Headroom

Converts Standard Line-Level Audio Sources to Dante Network Channels
Line-Level Inputs Accept Unbalanced -10 dBV or Balanced+4 dBu Signals with >18 dB Headroom
Front-Panel Gain Adjustment with Dual-LED VU Meter for Each Audio Input
Converts Four Dante Network Audio Signals to Balanced Line Level
Line-Level Outputs Provide +4 dBu with >18 dB Headroom

Converts Standard Line-Level Audio Sources to Dante Network Channels
Line-Level Inputs Accept Unbalanced -10 dBV or Balanced+4 dBu Signals with >18 dB Headroom
Front-Panel Gain Adjustment with Dual-LED VU Meter for Each Audio Input
Converts Four Dante Network Audio Signals to Balanced Line Level
Line-Level Outputs Provide +4 dBu with >18 dB Headroom

Interfaces Two Dante Inputs and Two Dante Outputs
Converts Two Standard Mic or Line Audio Sources to Dante Network Channels
Each Input is Switch-Selectable for Mic or Line
No User or Installer Gain Adjustments are Required
Automatic Microphone Gain of 40 dB for Condenser Mics and 60 dB for Dynamic Mics
P48 Phantom is Provided on Each Microphone Input

Interfaces Two Dante Inputs and Two Dante Outputs
Converts Two Standard Mic or Line Audio Sources to Dante Network Channels
Each Input is Switch-Selectable for Mic or Line
No User or Installer Gain Adjustments are Required
Automatic Microphone Gain of 40 dB for Condenser Mics and 60 dB for Dynamic Mics
P48 Phantom is Provided on Each Microphone Input

Interfaces Four Dante Inputs and Four Dante Outputs
Converts Four Standard Mic or Line Audio Sources to Dante Network Channels
Each Input is Switch-Selectable for Mic or Line
No User or Installer Gain Adjustments are Required
Automatic Microphone Gain of 40 dB for Condenser Mics and 60 dB for Dynamic Mics
P48 Phantom is Provided on Each Microphone Input

Interfaces Four Dante Inputs and Four Dante Outputs
Converts Four Standard Mic or Line Audio Sources to Dante Network Channels
Each Input is Switch-Selectable for Mic or Line
No User or Installer Gain Adjustments are Required
Automatic Microphone Gain of 40 dB for Condenser Mics and 60 dB for Dynamic Mics
P48 Phantom is Provided on Each Microphone Input

Converts Four Dante Network Audio Signals to RDL Format-A and Aux
Easy Installation with Format-A Connections on RJ45 through CATx Cable
Three Dante Audio Signals Feed Format-A Output Pairs A, B and C
Fourth Dante Audio Signal Feeds Auxiliary Balanced +4 dBu Line Output
Format-A Pairs are Distributed to Three Separate Format-A Output Jacks

Converts Four Dante Network Audio Signals to RDL Format-A and Aux
Easy Installation with Format-A Connections on RJ45 through CATx Cable
Three Dante Audio Signals Feed Format-A Output Pairs A, B and C
Fourth Dante Audio Signal Feeds Auxiliary Balanced +4 dBu Line Output
Format-A Pairs are Distributed to Three Separate Format-A Output Jacks

Converts Two Dante Network Audio Signals to Professional Line Level
Line-Level Outputs Provide +4 dBu with > 18 dB Headroom
Exceptional Low-Noise and Low-Distortion Performance
Crosstalk Below the Noise Floor
Signal LEDs Indicate Audio for Each of the Dante Audio Sources
High Resolution 24 Bit Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance

Converts Two Dante Network Audio Signals to Professional Line Level
Line-Level Outputs Provide +4 dBu with > 18 dB Headroom
Exceptional Low-Noise and Low-Distortion Performance
Crosstalk Below the Noise Floor
Signal LEDs Indicate Audio for Each of the Dante Audio Sources
High Resolution 24 Bit Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance

Converts Four Dante Network Audio Signals to Professional Line Level
Line-Level Outputs Provide +4 dBu with > 18 dB Headroom
Exceptional Low-Noise and Low-Distortion Performance
Crosstalk Below the Noise Floor
Signal LEDs Indicate Audio for Each of the Four Dante Audio Sources
High Resolution 24 Bit Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performanc

Converts Four Dante Network Audio Signals to Professional Line Level
Line-Level Outputs Provide +4 dBu with > 18 dB Headroom
Exceptional Low-Noise and Low-Distortion Performance
Crosstalk Below the Noise Floor
Signal LEDs Indicate Audio for Each of the Four Dante Audio Sources
High Resolution 24 Bit Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performanc

Dante Network Interface for Two Audio Inputs and Two Audio Outputs
Inputs and Outputs on Front-Panel RCA Jacks and Stereo 3.5 mm Mini-Jacks
Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Converts Two Unbalanced Line-Level Audio Sources to Dante Network Channels
Converts Two Dante Network Audio Signals to Unbalanced Line Level
Special Software Not Required for Module Setup

Converts Two Left/Right Digital Audio Sources to Four Dante Network Audio Signals
AES/EBU or S/PDIF Coaxial or Optical Inputs
Supports Input Sampling Rates from 32 kHz to 192 kHz
Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Digital Signal Lock Indicator for Valid Inputs
Transformer-Isolated AES/EBU Input

Converts Two Dante Network Audio Signals to Left/Right Digital Audio
AES/EBU or S/PDIF Coaxial or Optical Output
Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Digital Audio Output Sample Rate Equals Dante Sample Rate
Transformer-Isolated AES/EBU Output
Dante Audio Signals Remain in the Digital Domain through the Output
Special Software Not Required for Module Setup

Converts Two Dante Network Audio Signals to a Stereo Headphone
Output on Professional Quality 3.5 mm stereo MINI Jack
Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Front-Panel Output Level Control
Special Software Not Required for Module Setup
Exceptional Low-Noise and Low-Distortion Performance
High Resolution 24 Bit Digital to Analog Conversion

Converts Two Dante Network Audio Signals to Balanced Analog
Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Each Output Switch-Selectable for Mic or Line Level
Normal (-20 dBFS) Line-Level Output is +4 dBu with 20 dB Headroom
Microphone Output Level is Attenuated 50 dB
Each Output is Protected Against Phantom Voltage up to 48 Vdc

16 Watts RMS Constant Voltage Amplifier
70 V or 100 V Output
Converts One Dante Network Audio Signal to a Mono Constant Voltage Output
Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
0 dBFS Input for 16 W Output
Automatically limits supply current to protect against PoE+ port shutdown
VCA Control on Detachable Terminal Block

35 Watts RMS Constant Voltage Amplifier
70 V or 100 V Output
Converts One Dante Network Audio Signal to a Mono Constant Voltage Output
Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
0 dBFS Input for 35 W Output
Automatically limits supply current to protect against PoE++ port shutdown
VCA Control on Detachable Terminal Block

Converts Two Dante Network Audio Signals to two 20 W Outputs into 8 Ohms
Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
0 dBFS Input for 20 W per channel into 8 Ohms or 15 W per channel into 4 Ohms
Special Software Not Required for Module Setup
LED Indicator for Network Sync
High-Efficiency Class D Operation
Thermal and Short-Circuit Protection

50 Watts RMS Constant Voltage Amplifier
70 V or 100 V Output
Plenum Rated per UL 2043 Standard
Converts One Dante Network Audio Signal to a Mono Constant Voltage Output
Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
0 dBFS Input for 50 W Output
Analog Balanced Mono Input or Unbalanced Stereo Mini-Jack Input
Automatic Ducking Controlled by Network or Analog Input

Converts Left and Right USB Audio Channels to two Dante Network Channels
Supports USB Input Sampling Rates of 32 kHz, 44.1 kHz and 48 kHz
Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Digital Audio Sources Remain in the Digital Domain through the Dante Network Output
Special Software Not Required for Module Setup
LED Indicator for Valid Power and Network Sync

Dante Network Interface for Four Audio Mic Inputs
Each XLR Input Provides Switch-Selectable Mic Gain: 40 dB, 48 dB or 62 dB
48 V Mic Phantom (P48) on each input
Four XLR Front-Panel Inputs
Converts Four Standard XLR Mic Audio Sources to Dante Network Channels
Special Software Not Required for Module Setup
High Resolution 24 Bit Analog to Digital Conversion