- Line Voltage: 120 (Volts)
- Number of Outlets: 8
- Number of Isolated Banks: 2
- All 8 outlets surge protected, linearly filtered, and backed up
- AC Power Cord: Heavy duty captive power cord
- Dimensions: 17" W (19" w/ rack ears) x 19.2" D x 3.5" H (4" tall with feet installed)
- Weight: 72 lbs.

- Spike & surge protection, as well as RFI/EMI noise filtration
- Two retractable, incandescent lights with dimmer
- Digital voltmeter displays incoming line voltage
- 15 amp rating, 9 outlets

- Series Multi-Stage Protection, with LiFT and EVS
- Two retractable, long-life, low-heat LED lights with dimmer
- Voltmeter / Ammeter displays line voltage and true RMS current draw
- 20 amp rating, 9 outlets

- Line Voltage: 120 (Volts)
- Length: 13.3 (Inches)
- Width: 7.1 (Inches)
- Height: 1 (Inches)
- Weight: 0.4 (Lbs)

- Line Voltage: 120 (Volts)
- Length: 1 (Inches)
- Width: 7 (Inches)
- Height: 13.5 (Inches)
- Weight: 0.65 (Lbs)

- Power filter and power distribution with 10 A maximum output current (2300 Watt)
- Suitable for live applications and recording
- AC Noise filter
- Two retractable LED light fixtures with dimmer control
- 10x rear panel outlets and 1x front panel convenience outlet
- Protection OK indicator
- Overvoltage protection
- Main power switch at front panel
- 19" / 1U
- 19 cm Depth

- Power filter and power distribution with 10 A maximum output current (2300 Watt)
- AC noise filtering to reduce radio frequency and electromagnetic interference (RFI/EMI) >20 dB
- 1.5 - 20 MHz
- For all applications in recording and on stage
- 10x Rear panel outlets and 1x front panel convenience outlet
- Protection OK indicator
- Overvoltage protection
- Main power switch at front panel

- Protection circuits and noise filter
- Operating voltage 174-264 Volt; maximum surge current 6 Amps (1400 Watt max.)
- Full featured power conditioner
- Depth: 30.5 cm
- Format: 19 ", 1U
- Dimensions: 483 x 305 x 45 mm
- Weight: 7 kg

- Noise suppression> 80 dB between 20 - 20,000 Hz
- Lowest possible noise level for audio and recording applications
- SMP (Series Mode Protection) overvoltage protection
- Response Time <1 nanosecond
- 10 A (2300 watts) rated power
- 12 x IEC C-13 outputs
- USB power connector for charging media devices or for USB lamps
- Format: 19"/ 3 U
- Weight: 43.00 kg

- Line Voltage: 120 (Volts)
- Number of Outlets: 11
- All 11 outlets regulated, protected, and filtered. Rear panel: (8) 20 amp outlets and (1) 30amp outlet. 2 front panel 20 amp convenience outlets
- Regulation capture range: (LOW) 88-133 VAC @ 50/60Hz, (HIGH) 170-265 VAC @ 50/60Hz
- Compliance: cTUVus
- Over-Voltage Shutoff: 145 VAC Nominal (120VAC Input), 275 VAC Nominal (240VAC Input)

- Regulates voltages between 188 - 270 volts to 230 volts
- Integrated mains filter against interference
- Protective circuit design against voltage spikes and transients
- Rated power: 30 amps (6900 watts)
- Voltage meter
- USB charging socket
- 2 x IEC outlet on the front
- 6 x IEC outlet on the back
- 2 x IEC outlet 16 A on the rear

- Line Voltage: 120 (Volts)
- Number of Outlets: 9
- Number of Isolated Banks: 2
- Outlet Descriptions: All 9 outlets linearly filtered and surge protected
- Front Media Light(s): 2 multi-LED, dimmable lamps
- ControlFront panel: On/Off switch, Light dimmer knob
- AC Power Cord: 10 ft, captive 3/14 AWG, with NEMA 15 plug

- Line Voltage: 120 (Volts)
- Number of Outlets: 9
- Number of Isolated Banks: 2
- Outlet Descriptions: All 9 outlets linearly filtered and surge protected
- Front Panel Meter(s): Segmented LED voltmeter
- Front Media Light(s): 2 multi-LED, dimmable lamps
- Control: Front panel On/Off switch
- AC Power Cord: 10 ft, captive 3/14 AWG, with NEMA 15 plug

- Line Voltage: 120 (Volts)
- Number of Outlets: 9
- Number of Isolated Banks: 2
- All 9 outlets linearly filtered and surge protected
- Front Media Light(s): 2 multi-LED, dimmable lamps
- ControlFront panel: On/Off switch, Voltage meter dimmer button
- AC Power Cord: 10 ft, captive 3/12 AWG, with NEMA 20 plug

- 10 A (2300 Watt max.)
- IEC-320 Connectors 230 V: 8x rear panel and 1x front side
- SMP (Series Mode Protection)
- LIFT (Linear Filtering Technology) noise filtration (10 dB @ 10 kHz, 40 dB @ 100 kHz)
- Delay with 3 offsets for 3 groups with each 2 IEC C13 outlets
- Adjustable time delay of 0.5 - 10 seconds
- Auto reset after overvoltage