Blustream IP500UHD-TX IP Multicast UHD Video Transceiver over 10Gb Managed Network, HDMI 2.0 4K 60Hz 4:4:4, Bi-directional IR, RS-232 & USB/KVM, PoE+, Ethernet pass-through, Analogue Audio Embedding, Analogue Audio Breakout, and HDCP 2.2
BS-IP500UHD-TX
- Video input: 1 x HDMI Type A, female
- Video output: 1 x HDMI Type A, female
- Audio input/Output: 1 x 5-pin Phoenix connector
- Ethernet port: 1 x 10GBaseT RJ45 Video network, 1 x SFP+ module video network, 1 x 1Gb LAN RJ45 pass-through
- RS-232 serial port: 1 x 3-pin Phoenix connector
- USB/KVM Port: 1 x USB-Type B (host) , 2x USB-Type A (device)
- IR input: 1 x 3.5mm stereo jack
- IR output: 1 x 3.5mm mono jack
- Dimensions (WxDxH): 191mm x 153mm x 25mm
- Dimensions Including Connections (WxDxH): 191mm x 158mm x 25mm
- Shipping Weight: 1kg
- Operating Temperature: 32°F to 104°F (0°C to 40°C)
- Storage Temperature : -4°F to 140°F (-20°C to 60°C)
En rupture de stock temporaire
KEY FEATURES:
Advanced 18Gbps UHD Video over 10Gb Managed Network with visually lossless compression and zero latency
Supports HDMI 2.0 18Gbps specification with pass-through for up to 4K 60Hz 4:4:4, and with 10/12-bit HDR sources, including Dolby Vision
Transceiver can be configured as a point of transmission or a receiver as required
Supports video scaling and single-frame switching
Supports all known digital HDMI audio formats including Dolby TrueHD, Atmos, DTS-HD Master Audio and DTS:X transmissions
Support fixed signal routing function for IR, RS-232, CEC and USB
USB end-to-end / point-to-point pass-through
Analogue L/R audio embedding and audio breakout (balanced and unbalanced)
Bi-directional 10/100/1000BaseT Ethernet pass-through
Supports bi-directional 5V or 12V IR pass-through
PoE+ (Power over Ethernet) to power Blustream Multicast products from PoE+ switch
HDCP 2.2 compliant with advanced EDID management
Local 12V 2.5A power input (should Ethernet switch not support PoE+, PSU sold separately)
Features 4 operational modes:
- Matrix distribution (requires 10Gb network switch)
- Video wall (requires 10Gb network switch)
- Multiview mode (requires 10Gb network switch)
- One-to-one HDMI extender (no network switch required)