- Suitable for Alto TS315S subwoofer
- Padded
- Colour: Black

- Durable, padded cover tailored specifically for the TS318S subwoofer.
- Added security to slip-on application thanks to bottom strap ensuring the cover stays in place regardless of orientation.
- Side cutouts give easy access to integrated handles

900 watts of peak power output
High-efficiency Class D amplifier
Transducer: 12-inch with 2.5-inch high-temperature voice coil
(2) XLR+1/4-inch combo inputs + (2) balanced XLR line outputs
XLR outputs, with six discreet DSP output modes for ideal matching with companion full-range speaker
Polarity Reverse switch and Extended LF switch for increased EQ control
Electronic clip, thermal and transducer overdrive protection
Rugged, internally-braced front-ported MDF cabinet with integrated 36mm pole socket
Rugged, mar-resistant splatter-spray finish always looks good, even with heavy use

- Durable, padded speaker covers are tailored specifically for the TX212
- Added security to slip-on application thanks to bottom strap ensuring the cover stays in place regardless of orientation
- Top and side cutouts give easy access to TX212’s integrated handles

- 350 Watts peak
- 90 H x 60 V horn delivers greater coverage
- 10-inch LF driver, 1.5-inch voice coil
- 1-inch titanium diaphragm HF compression driver
- Lightweight, portable design for main or wedge monitor operation
- Standard speaker pole socket
- Bi-amplified design with precision active crossover and EQ
- Balanced XLR Mic/Line input, Link Output and Volume control

-Power Output: 100 Watts peak, (50 Watts continuous power)
-LF Driver: 8-inch (203.2 mm) woofer
-HF Driver: 3-inch (76.2 mm) tweeter
-Frequency Response: 60 Hz - 20 kHz
-Bluetooth® Connection: Manual pairing or NFC

- 16 total inputs including XLR jacks w/ phantom power on ch. 1-4
- On-board Alesis digital effects with 256 variations
- Expanded channel count perfect for small groups or sub-mixes
- 4 mic input channels with gold-plated XLR and balanced line inputs
- Two stereo input channels with balanced TRS jacks
- High headroom circuitry offering extra dynamic range
- Ultra-low-noise discrete mic preamps
- 3-band EQ on each channel
- Footswitch input for effects on/off (sold separately)
- 2 aux sends per channel for external effects and monitoring
- 2-bus design with Main and Control Room 1/4” stereo outputs
- Aux inputs/outputs for external audio source integration
- Switchable phantom power

- Six total inputs with a phantom powered XLR jack on channel 1
- 1/4" Main, Tape, Headphone & Aux outputs for flexible signal routing
- Perfect for musicians looking for a compact, capable mixer
- Mic input channel with gold plated XLR and balanced line input
- Two stereo input channels with balanced TRS jack
- High headroom circuitry offering extra dynamic range
- Ultra-low-noise discrete mic preamp with Phantom power
- Balanced inputs for highest signal integrity and low-noise operation
- Warm, natural two-band EQ on mono channel
- 2-Track inputs w/assignable bus: main mix or headphone out
- Highly accurate four-segment bar graph meters
- Aux inputs/outputs for external audio source integration
- Peak LEDs on each channel

- 12 total inputs including XLR jacks w/ phantom power on ch. 1 & 2
- Expanded channel count perfect for small groups or sub-mixes
- High headroom circuitry offering extra dynamic range
- Ultra-low-noise discrete mic preamps
- 2 aux sends per channel for external effects and monitoring
- 3-band EQ on each channel
- Two stereo input channels with balanced TRS jacks
- Aux inputs/outputs for external audio source integration
- Switchable phantom power

Alto tweeter for TS212/TS215W HG00602

OND-ATO-TX315/TWEETER

- 16 Selectable UHF channels
- 4+ hour run time using a single AA battery
- 100+ ft. range (line of sight)
- Power via USB for unlimited run time
- Mic and line level signal compatibility
- Single-frequency mono operation
- Versatile, compact, and convenient

- Output Power: 2500 W
- Low-Freq. Driver: 15.0” driver, 2.5” (63 mm) high-temp. voice coil. 1 x 800 W RMS @ 2 Ω
- High-Freq. Driver: 1.0” exit ceramic driver with 1.4” (35 mm) coil. 1 x 450 W @ 4 Ω
- Crossover Freq.: 2 kHz
- Max. SPL: 135 dB (peak), 132 dB (continuous) (dB-SPL @ 1 m)
- Freq. Response: 44 Hz – 20 kHz (+/- 3 dB)
- Freq. Range: 33 Hz – 20 kHz (-10 dB)
- Horn Coverage: 90° horizontal x 60° vertical (nominal)
- Connectors: (2) XLR+1/4” (6.35 mm) TRS combo inputs (Balanced), (1) XLR output (Link), (1) IEC power cable input
- Input Impedance Line: 10 KΩ balanced, 20 KΩ unbalanced, Mic: 1.2K
- Line Gain/Volume Control Range: to 0 dB, +4 dBu nominal, +10 dBu for max output
- Mic/Inst. Gain/Volume Control Range: to +50 dB
- USB Charging Port: 5V 2.1A
- Controls: Power switch, (2) gain control knobs (1 per input), (2) Mic/Line switches, Bluetooth volume control encoder, Pairing button, Stereo Link button, Sub Size button, Speaker Use button
- Indicators:(1) Input Channel Signal/Limit/Clip LED (Green = Ch1/2 Signal) (Yellow = Ch1/2 Limiter) (Red = Ch1/2 Output Clipped), (1) Bluetooth LED (Blue), (1) Link LED (Orange), (4) DSP Presets LED (Green), (3) HPF LED (Green)
- Power Connection: IEC
- Voltage: 100-120V, 50/60Hz; 220-240V, 50-60Hz
- Consumption: 1100W
- Fuse: 100-120V T15AL AC250V; 220-240V T6.3AL AC250V
- Protection: Electronic clip, thermal, and transducer overdrive protection
- Enclosure: Injected Molded Enclosure and Perforated Metal Grille
- Mounting/Installation: Standard 36 mm pole socket, flown application with integral M10 suspension points, or in a wedge monitor position
- Operating Temp.: -10°C to 45°C (14°F to 113°F)