The tape boasts 60 colour calibrated high-quality RGBW LEDs per metre. Each LED is patched as an individual pixel and offers consistent brightness and extended color gamut. Max. power consumption 14.1 watt per metre; 402 lumen per metre, 5V. Each pixel achieves 4,294,967,296 full colour display, scan frequency not less than 400Hz per second. Rated IP20; indoor use only.

- Quality Australian design
- RGB 24-bit True Color LED pixel strip
- Premium flexible 3oz thicker copper PCB
- Suitable for architectural + entertainment applications
- 12V DC input supply voltage
- 60 LED/meter density

It boasts 60 colour-calibrated, individually-addressable, RGBW LEDs per metre. Max. power consumption 14.3 watts per metre (RGBW all on), 402 lumens per metre, 5V. Each pixel achieves a 32-bit, True Colour display, whopping 4,294,967,296 possible colours for each LED, scan frequency 400Hz per second.

It boasts 20 colour-calibrated, addressable, RGBW Pixels per metre. Each Pixel is patched with three RGBW LEDS. Max. power consumption 19.7 watts per metre (RGBW all on), 511 lumens per metre, 12V. Each pixel achieves a 32-bit, True Colour display., whopping 4,294,967,296 possible colours for each LED, scan frequency not less than 1.5KHz per second.

The maximum output at 3000K, 4000K and 6000K is 1385 lumens per metre. 9CH is ENTTEC’s range of high output 24V white LED tape. Choose from Warm White (3000K), Natural White (4000K), or White (6000K) colour temperatures. Maximum input current rating is 0.61 A per metre which equals 3.05 A for a 5 metre length. 9CH consumes a maximum of 14.64 W per metre and the max. continuous length is 9 m.

The maximum output at 3000K, 4000K and 6000K is 1385 lumens per metre. 9CH is ENTTEC’s range of high output 24V white LED tape. Choose from Warm White (3000K), Natural White (4000K), or White (6000K) colour temperatures. Maximum input current rating is 0.61 A per metre which equals 3.05 A for a 5 metre length. 9CH consumes a maximum of 14.64 W per metre, and the maximum continuous length is 9 m.

The maximum output at 3000K, 4000K and 6000K is 1385 lumens per metre. 9CH is ENTTEC’s range of high output 24V white LED tape. Choose from Warm White (3000K), Natural White (4000K), or White (6000K) colour temperatures. Maximum input current rating is 0.61 A per metre which equals 3.05 A for a 5 metre length. 9CH consumes a maximum of 14.64 W per metre, and the maximum continuous length is 9 m.

9CY-10 is a 24V CTA LED Tape, which allows variations between 3000K to 5500K color temperature range. The max. at 3000K is 488 lumens per metre, the max at 5500K is 570 lumens per metre. Maximum input current rating is 0.49 a per metre, which equals 2.45 A for 5-metre length. 9CY-10 consumes a max. of 11.8W per metre and has a maximum continous length of 9.2 m.

Thanks to a brilliant output configuration, 9VL4-10 is the best RGB tape to ever come out of the ENTTEC LED factory. You'll experience quality unlike any other tape on the market. With 60 high-quality RGB LEDs crafted per metre, this tape outshines the competition. Highly efficient at less than 11W total power consumption per metre. Copper track for effective heat dissipation and long life.

Thanks to a brilliant output configuration, 9VLW-10 is the best RGBW tape to ever come out of the ENTTEC LED factory. You’ll experience quality unlike any other tape on the market. With 60 high quality RGB and White LEDs crafted per metre, this tape outshines the competition. Highly efficient at less than 17.28W total power consumption per metre. Copper track for effective heat dissipation.

- 1 x 5 pin XLR DMX ingang
- 2 x 5 pin DMX uitgang
- 2 x 3 pin DMX uitgang
- Bedient tot 512 DMX-kanalen
- Alle uitgangen zijn in tegelijk te gebruiken, in elke combinatie
- Alle uitgangen zijn geisoleerd en beschermen je apparatuur tegen voltagepieken van tot wel 1000V

- 1 x 5 pin XLR DMX ingang
- 4 x 5 pin DMX uitgang
- Bedient tot 512 DMX-kanalen
- Alle uitgangen zijn in tegelijk te gebruiken, in elke combinatie
- Alle uitgangen zijn geisoleerd en beschermen je apparatuur tegen voltagepieken van tot wel 1000V

- Two bi-directional DMX/ E1.20 RDM ports with optional termination and RDM support
- IEEE 802.3af PoE (Power over Ethernet) or DC 7-24v input
- Surface or TS35 DIN-rail mount
- Support for Art-Net 4, sACN and ESP to DMX conversion
- Support for DMX -> Art-Net (Broadcast or Unicast) / DMX -> ESP (Broadcast or Unicast) / DMX -> sACN (Multicast or Unicast)
- HTP/LTP merging support for up to 2 DMX sources
- Pluggable terminal blocks and inbuilt DMX termination
- Intuitive device configuration and updates through the inbuilt web interface
- Surface or TS35 DIN rail mount
- 10/100 Mbps network speed
- ‘Current Port Buffer’ allows live DMX values to be viewed
- Configurable refresh rate

- Two 4-universe pixel outputs with Data and Clock support
- Support for up to 8 universes of Art-Net, sACN, KiNet and ESP
- Easily extendable network - daisy chain ethernet connection through multiple devices
- DHCP or Static IP address support
- Multiple pixel protocols supported, see: www.enttec.com/support/supported-led-pixelprotocols/
- Surface or TS35 DIN rail mounting option
- Intuitive device configuration and updates through the inbuilt web interface
- Test/Reset button allows installers to quickly check wiring is correct without requiring a network connection
- Simple Fx generator mode to create and execute preset effects on the fly, configurable to play from power up
- Grouping functionality to reduce input channel count

- 1 DMX/RDM input & 4 DMX/RDM outputs
- 1500V Opto-isolation between each DMX port to protect against stray voltages on the DMX line
- Pluggable screw terminal connectors
- Forward facing LED status indicator to view current DMX/RDM traffic
- Support for DMX512-A and ANSI E1.20 RDM
- Output refresh rate mimics the input
- Electrically insulated case material
- Surface or TS35 DIN rail mount
- No configuration required
- 7V-24V DC power input
- -20°C to 50°C (-4°F to 122°F) operating temperature

- 12-24V input (20A maximum)
- Dim constant voltage (CV) LED strip (4 x 5A per channel maximum)
- Huge 1KHz PWM signal refresh rate
- PLink in and out connector for auto-addressing (each unit can be spaced up to 300m away from the next when using PLink over Cat6 cable)
- Single DMX connector for DMX/RDM input, or chaining between devices
- Convert DMX to PLink on each device – changing the address of the first CVC4 in the chain will update the rest of them
- Status LED and mode selection DIP switch to toggle between bitrate and RGB/RGBW operating modes
- User-serviceable fuse to protect against short circuits
- Passive cooling with internal overheating protection
- Compact design with integrated M4 surface mounting holes or TS-35 DIN rail mount

- RGB, 3 in 1 full color LED pixel strip
- Premium flexible white 3oz copper PCB’s
- Individually addressable led pixels, suitable for stage, entertainment and architectural applications
- 12V DC input supply voltage
- 60 Pixels/meter density
- Back up data line BI/BO (In/Out)
- WS2815 IC chips
- 16.7 million possible shades
- 120-degree illumination
- 3M adhesive double side tape on the rear
- Built-in data signal reshaping circuit
- High LED density
- Can be cut or joined at each copper tab
- IP20 Indoor use only
- Designed for use with ENTTEC pixel products
- Maximum 8.5 Watts/Meter