AD, Line In 1-8, rear

Resolution AD: 24 bit
Signal to Noise ratio (SNR): 113 dB RMS unweighted, 116 dBA
Frequency response @ 44.1 kHz, -0.1 dB: 5 Hz - 20.8 kHz
Frequency response @ 96 kHz, -0.5 dB: 5 Hz - 45.8 kHz
Frequency response @ 192 kHz, -1 dB: 5 Hz - 92 kHz
THD: < -110 dB, < 0.00032 %
THD+N: < -104 dB, < 0.00063 %
Channel separation: > 110 dB
Input: 6.3 mm TRS jack, electronically balanced
Input sensitivity: 8 kOhm unbalanced, 12 kOhm balanced
Input sensitivity switchable to Lo Gain, +4 dBu, -10 dBV
Input level for 0 dBFS @ Lo Gain: +19 dBu
Input level for 0 dBFS @ +4 dBu: +13 dBu
DA - Stereo Monitor Output Phones (9-12)

As DA, but:

Output: 6.3 mm TRS stereo jack, unbalanced
Maximum output level at 0 dBFS, High: +16.8 dBu
Maximum output level at 0 dBFS, Low: +2 dBV
Output impedance: 30 Ohm
AES/EBU
2 x XLR, transformer-balanced, galvanically isolated, according to AES3-1992

Microphone In 9-12, front

As AD, but:

Input: XLR, electronically balanced
Input impedance: 3.4 kOhm
Signal to Noise ratio (SNR): 112 dB RMS unweighted, 116 dBA
Gain range: 54 dB
Maximum input level, Gain +6 dB: +10 dBu
Instrument In 9-12, front

As AD, but:

Input: 6.3 mm TS jack, unbalanced
Input impedance: 800 kOhm
Signal to Noise ratio (SNR): 112 dB RMS unweighted, 115 dBA
Maximum input level, Gain +6 dB: +21 dBu
DA, Line Out 1-8, rear

Dynamic range (DR): 115 dB RMS unweighted, 118 dBA
Frequency response @ 44.1 kHz, -0.5 dB: 5 Hz - 20.8 kHz
Frequency response @ 96 kHz, -0.5 dB: 5 Hz - 45 kHz
Frequency response @ 192 kHz, -1 dB: 5 Hz - 89 kHz
THD: -110 dB, < 0.00032 %
THD+N: -104 dB, < 0.00063 %
Channel separation: > 110 dB
Output: 6.3 mm TRS jack, servo-balanced
Output impedance: 75 Ohm
Output level switchable Hi Gain, +4 dBu, -10 dBV
Output level at 0 dBFS @ Hi Gain: +19 dBu
Output level at 0 dBFS @ +4 dBu: +13 dBu
Output level at 0 dBFS @ -10 dBV: +2 dBV
ADAT OPTICAL
2 x TOSLINK I/O, format according to Alesis specification
Standard: 2 x 8 channels 24 bit, up to 48 kHz
Double Speed (S/MUX): 2 x 4 channels 24 bit 96 kHz
Quad Speed (S/MUX4): 2 x 2 channels 24 bit 192 kHz
Quad Speed Windows USB: 1 x 2 channels 24 bit 192 kHz

SPDIF OPTICAL (VIA ADAT2)
1 x optical, according to IEC 60958
WORD CLOCK
BNC, switchable termination

The OPTO-X is an optional extension board for the HDSPe MADI FX triple MADI card with full functionality.

Like the standard extension board it comes with Word Clock I/O and a D-sub connector for MIDI and AES I/O.

The standard coaxial MADI I/O is replaced by an optical MADI I/O.

Using the OPTO-X the HDSPe MADI FX then has three optical MADI I/Os

36 Inputs / 36 Outputs
4 x ADAT I/O (up to 192 kHz via S/MUX4)
1 x AES/EBU I/O (192 kHz)
1 x SPDIF I/O (192 kHZ)
2 x MIDI I/O
TotalMix
optional: Time Code Option (TCO)
optional: Expansion Board WCM
optional: Expansion Board TEB

RME MRC Multi Remote Control

RME NT-RME 2 (lockable) Power Supply for RME I/O Boxes

RME USB-C cable for Babyface Pro

RME Wordclock Cable, internal, 3-Pin

RME Word Clock Module I/O for HDSP9632 *