Filters

- 24-bit/192 kHz USB 2.0 audio interface
- 2 Class-A D-PRE mic preamps supporting +48 V phantom power
- Rupert Neve Designs transformer switchable on each input channel
- 2 analog XLR/TRS combo inputs (Hi-Z switch on input 1 for electric guitar), plus 2 TRS line inputs, headphones jack with independent level control

10“ Subwoofer (paper)
Amp. Power RMS: 130 W
Frequency Response: 28 Hz - 120 Hz
Max. SPL at 1 m: =104 dB
Optimized for T Series studio monitors

- U-ART 1.9" Accelerated Ribbon Tweeter with HPS Waveguide
- Polypropylene 5" woofer and rear-firing bass-reflex port
- Cumulated Amp. Power RMS: 70 W
- Frequency Response: 45 Hz - 25 kHz
- Max. SPL Per Pair at 1 m: =106 dB

- U-ART 1.9" Accelerated Ribbon Tweeter with HPS Waveguide
- Polypropylene 7" woofer and rear-firing bass-reflex port
- Cumulated Amp. Power RMS: 70 W
- Frequency Response: 39 Hz - 25 kHz
- Max. SPL Per Pair at 1 m: =110 dB

- U-ART 1.9" Accelerated Ribbon Tweeter with HPS Waveguide
- Polypropylene 8" woofer and rear-firing bass-reflex port
- Cumulated Amp. Power RMS: 70 W
- Frequency Response: 39 Hz - 25 kHz
- Max. SPL Per Pair at 1 m: =110 dB

• Dynamic closed-back design
• Natural, tight, and balanced sound reproduction
• Linear response throughout the frequency range
• Balanced studio-quality sound with exceptional imaging
• Great choice for studio and critical listening
• Over-the-ear design built for comfort and isolation
• Soft cushion ear cups with 90-degree swivel for easy single-ear monitoring
• High-performance phase-co

• 5x8 Pad Grid Matrix Featuring 40 RGB-backlit Pads
• 25-Key Gen 2 Dynamic Keybed
• 8 Assignable Endless 360 Rotary Knobs
• Dedicated Scene Launch Buttons
• 4 Directional Arrows to Navigate Clip Matrix
• Includes Ableton Live Lite Music Production Software (Mac/PC)

• 8x8 Pad Grid Matrix Featuring 64 RGB-Backlit Pads
• 9 Assignable Faders
• Smart Scale View Mode for Real-time Project Feedback
• Note and Drum Modes for the Most Playable Pads and Inspired Performances
• Dedicated Scene Launch Buttons
• 4 Directional Arrows to Navigate Clip Matrix
• Includes Ableton Live Lite and AIR Music Tech. Production Software (Mac/PC)

- Standalone MPC - No Computer Required
- Powerful Multicore Processor System
- Built-in Stereo Monitors
- 16 Full-size Velocity Sensitive RGB Pads
- Brilliant 7-inch Multi-Touch Display
- 2 GB RAM, 16GB Onboard Storage, Over 10GB pre-installed content
- Mac & PC Controller for MPC Software (included)
- Stereo Inputs: 3 Stereo Outputs

- Standalone MPC - no computer required
- Powerful Multicore System from the MPC Live and
MPC X
- 16 velocity-sensitive RGB Pads
- 7-inch high-resolution multi-touch display
- 2GB RAM, 4GB of on-board storage
- Mac & PC Controller for MPC Software (Included)
- Stereo Line-Level Inputs
- MIDI In and MIDI Out
- 4 TRS CV/Gate Jacks, 8 Outputs Total
- (1) USB-A 3.0 Slot

• Standalone MPC- No computer required.
• 16 Velocity-Sensitive RGB Pads with Poly
Aftertouch.
• 2GB of RAM for sampling and recording
• 16GB of internal storage (Over 7.5 GB for
user storage)
• 1 Free Premium MPC Plugin Instrument
using included voucher. (limited-time offer)
• 7 inch Full-color multi-gesture touch
display
• 4 Touch-capacitive Q-Links knobs
• Stereo Line Level Inputs.
• Stereo Outputs.
• Onboard Wi-Fi / BlueTooth
• USB Host Port for Thumb Drives, Midi
Controllers, or Class Compliant Audio
Interfaces.
• Akai Red Colorway
• Works as a control surface for MPC 2
Software, for Mac & PC (Included)

- Low directivity tweeter for a flexible listening position
- Designed without a port allowing it to be placed near a wall
- Numerous settings for optimal integration
- Accurate control, even in the very high end
- Flax sandwich cone: controlled and articulated bass, natural and detailed lower mid-range and upper mid-range registers
- Threads for ceilling and wall mounts (fastening accessori

/ Analog 3-way monitor, left version, 8,25" + 3" + 1" drivers (per piece)

/ Analog 3-way monitor, right version, 8,25" + 3" + 1" drivers (per piece)

- 10" woofer
- Output power: 256W
- Freq resp: 16 - 800 Hz ( ±6 dB free field)
- Max SPL: 105.0 dB
- Ideal choice for smaller rooms and smaller studio monitors
- Flexible 2.0/0.1 Bass Manager
- Setup, Align, and Operate with Neumann.Control for iPad

- Two products in one: audio interface and production controller
- Record through two high-quality XMAX mic preamps
- Control your favorite DAW with a touch-sensitive motorized fader and intuitive navigation controls
- Compact, ergonomic design fits into any studio, whether in your bedroom or your backpack

USB Podcast Microphonen, Dynamic for Close Micing. Incl RM2

- Add mono or stereo samples via standard SD card
- 8 velocity-sensitive & pressure-sensitive pads
- USB MIDI plus standard MIDI inputs & outputs
- Also controls computer MIDI software & outboard MIDI gear
- Drag-and-drop sample kit editor for Mac® & PC included
- Built-in library of popular sounds & samples
- Includes additional free Akai Pro loop library download

Frequency response
Variation in frequency response in band from 20Hz to 20kHz ~13,7dB SPL
SPL/sensitivity
108dB / 1vrms@1Khz 30ohm
Impedance
32ohm, smart devices ready
Ear cups dimensions
Outer diameter: 90 mm
Ear cups material
American walnut
Headband material
Stainless steel and nautical artificial leather
Earpads size
Outer diameter: 90 mm
Inner diameter: 55mm
Depth: 20mm

SPEAKER

Hand picked and left / right matched transducers delivering accuracy and instrument separation. (+/-1dB SPL tolerance, pink noise, range 100Hz-10kHz in free field*)
50 mm, PET 25u membrane, 2 layered coil, 50 ohms,
Dynamic Neodymium speaker with 108dBSPL @ 0 dBu RMS 1KHz 30ohm output that makes them work with smart devices too.
Replaceable using home tools.

ACOUSTICS

Replaceable earpads with outer diameter of 95 mm(3.75inch), inner diameter of 57.5mm(2.25inch) and depth of 20mm(0.8inch), +/-2.55mm.
Perforated hybrid artificial leather and velour earpads to control flow resistance around the earpads seal resulting in smoother response through all frequency bands and improved heat dispersion.
1kHz @ 85dBSPL sweep THD < 0.074%, Variation in frequency response in band from 20Hz to 20kHz ~12 dB SPL* pink noise.
Front to back air pressure equalization controlled with Saati flow resistor 3.2Ohms(²)/1cm²
Ex-centric and angled speaker in a conical radiation chassis with optimal sound stage for the spatialization of objects in binaural renderer
Frequency response tuned for translation of immersive mix between binaural and speaker setup

HEADBAND

Artificial leather strap
Clamping force set for target frequency response on industry standard bitragional diameter of 14.3cm (KEMAR)
Stainless spring steel with powder coating
360 earcups rotation with sliders for head size adjustements
Strap and steel headband are replaceable using home tools

CABLE

Detachable braided silicone cable employing OFC core to ensure minimal signal distortion.
Color labeled L and R jacks (Left is Black)
Ball-locking mechanics on the embedded 2.5mm jack plugs
Screw on adapter from 3.5mm to 6.3mm jacks (1/8 to 1/4 inch)
WARRANTY
5 years limited warranty (Earpads and cable are excluded due to the nature of exposure)

5.25-inch, woven-composite, low-frequency driver
1-inch, ultra-low mass, silk-dome, high-frequency driver
Fast, reliable stereo Bluetooth® 5.0 wireless input
100W, Class D dual amplification
55 Hz to 20 kHz frequency response
104 dB SPL (Peak, @ 1 meter)
High- and low-frequency Acoustic Tuning controls
Balanced, ¼-inch TRS inputs; unbalanced, ⅛-inch stereo and RCA inputs; and integrated stereo headphone amplifier with front-panel ⅛-inch output
Protection: RF interference, output-current limiting, over-temperature, turn-on/off transient, subsonic filter
Power Saver mode (engages after 40 minutes)

Frequency Range: Mic Inputs & Monitor Outputs: 20Hz - 20kHz
Impedance: Microphone Input: 4KΩ, Instrument Input: 1MΩ
Preamplifier Gain: 0 - 76dB
Equivalent Noise: -131.5dBV (A-weighted)
Line Output Max Level: 4dBu
Headphone Output Power: 250mW
Power Requirements: USB-C PD (9V, 3A)
Audio Outputs: 2 x combo jack (mic, instrument, line), 1 x 3.5mm TRRS headset jack (I/O)
USB Interfaces: 2-in/14-out multichannel device, 2-in/2-out with mix-minus (x2)
Bit Depth: 24-bit, Sample Rate: 48kHz
Recording Storage: microSDHC, microSDXC, USB-C removable drive (exFAT, min 100MB/s)
Data Transfer: USB 3.0 SD card reader (130MB/s)
Network Connectivity: WiFi 802.11g/n/ac (2.4GHz & 5GHz), Ethernet 100/100
Internal Storage: 4GB (SMART pads)

Key Features:
• Volledig geïntegreerde audioproductie studio
• Nieuwe, extreem stille Revolution Preamps™ (-131.5dBV EIN, 76dB gain)
• Vier hoge kwaliteit Neutrik® combo inputs voor zowel microfoons als instrumenten.
• Negen vrij toewijsbare kanalen voor gepersonaliseerde mixer configuraties.
• Acht SMART pads voor het triggeren van audiofragmenten, effecten en meer.
• Nieuwe quad-core engine wat dit product de snelste console op de markt maakt.
• Een groter 5,5” HD touchscreen met haptische feedback en een rotary encoder om gemakkelijk alle instellingen te veranderen.
• Twee USB inputs om twee apparaten tegelijk aan te sluiten.
• Geavanceerde Bluetooth® verbinding voor hoge kwaliteit integratie van telefoongesprekken.
• Studio kwaliteit audio processing en effecten aan boord, inclusief APHEX® Aural Exciter™, Big Bottom™ en Compellor™, EQ, compression, pitch shift, robot effects, reverb, delay.
• Professionele kanaal presets en VoxLab™ processing editor voor een snelle en gemakkelijke set-up.
• Opname in multitrack of stereo naar een microSD™ kaart, USB opslag of computer.
• Vier hoge kwaliteit hoofdtelefoon outputs en 1/4 inch gebalanceerde line outputs.
• Dit product is volledig bij te werken en er zal met regelmaat een firmware update beschikbaar zijn.

The RODECover 2 is a bespoke cover designed to fit perfectly over the RODECaster Pro II. Made from high-grade clear polycarbonate, it protects your RODECaster Pro II from dirt and dust and keeps your setup looking neat and professional when not in us

Produce and perform music anywhere, anytime—without clutter or complications. The MC-101 GROOVEBOX has all the high-quality sounds, sequencing, and effects of the professional MC-707, in a compact four-track version that’s go-everywhere portable. Get started with an inspiring collection of ready-to-go sounds and patterns, or easily create your own. Craft a unique style by importing custom sounds

- Sampling frequencies: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
- Quantization bit depth: 16/24 bit
- Mic inputs 1/2 (balanced): XLR-3-31 (1: GND, 2: HOT, 3: COLD), 6.3-mm standard TRS stereo jack (Tip: HOT, Ring: COLD, Sleeve: GND)
- Instrument inputs 1/2 (unbalanced): 6.3mm standard TS jacks (Tip: HOT, Sleeve: GND)

2-in/2-out USB Audio Interface
1 x Class-A Audient Console Mic Preamplifier
1 x Discrete JFET Instrument Input
High Performance Converters
iD ScrollControl Mode
Zero Latency Monitoring with Monitor Mix & Pan
Main Speaker Output
Class-AB Headphone Amplifier with Dual Outputs
Monitor Control Functionality
USB2.0 Bus Powered
24bit/96khz
All-Metal Enclosure
Windows, macOS and iOS compatib

- 2 monophonic step sequencers
- 16-track drum sequencer (one track per pad)
- 16 Projects, each with 16x2 sequences, 16 drum sequences and a controller map
- Performance controls
- Randomizer with Amount and Probability settings
- Real-time looper/roller touch strip
- Independent swing amount per sequence
- Touch sensitive knobs
- Tap Tempo
- Connectivity: CV/GATE outputs (1 volt per octave CV, 10 volt gates), 8 drum gate outputs, Clock sync with multiple standards, MIDI In/Out with supplied MIDI adaptors, USB class compliant

- Midi mixer to control virtually any DAW
- 8 individual line faders, 1 master fader
- 24 knobs, arranged 3 per channel
- 16 buttons arranged in 2 banks provide mute, solo and record arm per channel
- Sends all mixer settings to the DAW with a single butt

- 16 Thick Fat RGB illuminated velocity and pressure sensitive MPC pads
- 64 assignable pads accessible via 4 banks
- 4 assignable faders, 4 assignable Q-Link knobs, 4 assignable Q-Link buttons
- 36 assignable controls accessible via 3 banks
- Classic MPC