Studio Monitor

Powerful bi-amplified studio monitor with reference-class performance. Its 6.5” woofer in a bass reflex cabinet provides stunning low end and high SPL capability with undiminished clarity. DSP controlled electronics ensure linear phase response and allow for room-adaptive calibration via Neumann’s revolutionary MA 1 Automatic Monitor Alignment.

• Linear frequency and phase response
• Deep low end down to 39 Hz and high SPL capability
• DSP engine for improved performance and automatic room alignment
• Razor-sharp imaging due to extremely low tolerances (± 0.8 dB)
• Analog (XLR) and digital (RCA) inputs, optional: AES67 connectivity
• May be combined with other KH line speakers in immersive/surround setups.

-Computer-modeled cabinet design using Low Resonance Integral Molding (LRIM) materials
-Extraordinary bass depth (26 Hz) with high sound pressure (122.4 dB)
-Precise dispersion in the midrange and high frequencies
-As a stereo system with KH 750 DSP and iPad app, controllable and alignable to the room

- 4" + 1" drivers
- 130 + 70 W Output power
- Freq respons: 53 Hz - 22 kHz, ± 6 dB (-6 dB free field)
- Max SPL: 108.8 dB SPL
- Low latency DSP engine (2ms)
- Setup, align and operate with Neumann.Control fo iPad
- Delivers excellent detail in every surrounding

10“ Subwoofer (paper)
Amp. Power RMS: 130 W
Frequency Response: 28 Hz - 120 Hz
Max. SPL at 1 m: =104 dB
Optimized for T Series studio monitors

- U-ART 1.9" Accelerated Ribbon Tweeter with HPS Waveguide
- Polypropylene 5" woofer and rear-firing bass-reflex port
- Cumulated Amp. Power RMS: 70 W
- Frequency Response: 45 Hz - 25 kHz
- Max. SPL Per Pair at 1 m: =106 dB

- U-ART 1.9" Accelerated Ribbon Tweeter with HPS Waveguide
- Polypropylene 7" woofer and rear-firing bass-reflex port
- Cumulated Amp. Power RMS: 70 W
- Frequency Response: 39 Hz - 25 kHz
- Max. SPL Per Pair at 1 m: =110 dB

- U-ART 1.9" Accelerated Ribbon Tweeter with HPS Waveguide
- Polypropylene 8" woofer and rear-firing bass-reflex port
- Cumulated Amp. Power RMS: 70 W
- Frequency Response: 39 Hz - 25 kHz
- Max. SPL Per Pair at 1 m: =110 dB

- Low directivity tweeter for a flexible listening position
- Designed without a port allowing it to be placed near a wall
- Numerous settings for optimal integration
- Accurate control, even in the very high end
- Flax sandwich cone: controlled and articulated bass, natural and detailed lower mid-range and upper mid-range registers
- Threads for ceilling and wall mounts (fastening accessori

/ Analog 3-way monitor, left version, 8,25" + 3" + 1" drivers (per piece)

/ Analog 3-way monitor, right version, 8,25" + 3" + 1" drivers (per piece)

- 10" woofer
- Output power: 256W
- Freq resp: 16 - 800 Hz ( ±6 dB free field)
- Max SPL: 105.0 dB
- Ideal choice for smaller rooms and smaller studio monitors
- Flexible 2.0/0.1 Bass Manager
- Setup, Align, and Operate with Neumann.Control for iPad

Alpha 80 Evo has a 1" (25mm) Aluminium tweeter and a 8" (20cm) woofer with Slatefiber cone developed and manufactured in Focal's workshops in France. This monitor features excellent dynamics and neutrality in its tonal balance. Thanks to new technologies and features, Alpha 80 Evo is highly versatile. Alpha 80 Evo will suit perfectly producers seeking for high SPL levels as well as deep low-end extension.

Alpha Twin Evo has a 1" (25mm) Aluminium tweeter and two 6.5" (16.5cm) woofers with Slatefiber cone developed and manufactured in Focal's workshops in France. This monitor features excellent dynamics and neutrality in its tonal balance. Thanks to new technologies and features, Alpha Twin Evo is highly versatile. Alpha Twin Evo will suit perfectly producers seeking for high SPL levels as well as deep low-end extension.

Sub One is a subwoofer composed of two 8" (20cm) Slatefiber cone woofers, manufactured in France by Focal. With a total RMS power of 200W, it covers a frequency band from 32Hz to 120Hz. Sub One offers great dynamics whilst maintaining low distortion. Designed with a focus on its width and front vents, Sub One integrates easily into a room, along a wall or under a desk.

2 Way 8" Active Studio Monitor with EBM Waveguide

Powerful bi-amplified studio monitor with reference-class performance. Its 6.5” woofer in a bass reflex cabinet provides stunning low end and high SPL capability with undiminished clarity. DSP controlled electronics ensure linear phase response and allow for room-adaptive calibration via Neumann’s revolutionary MA 1 Automatic Monitor Alignment.

• Linear frequency and phase response
• Deep low end down to 39 Hz and high SPL capability
• DSP engine for improved performance and automatic room alignment
• Razor-sharp imaging due to extremely low tolerances (± 0.8 dB)
• Analog (XLR) and digital (RCA) inputs, optional: AES67 connectivity
• May be combined with other KH line speakers in immersive/surround setups.

Powerful bi-amplified studio monitor with reference-class performance. Its 6.5” woofer in a bass reflex cabinet provides stunning low end and high SPL capability with undiminished clarity. DSP controlled electronics ensure linear phase response and allow for room-adaptive calibration via Neumann’s revolutionary MA 1 Automatic Monitor Alignment.

• Linear frequency and phase response
• Deep low end down to 39 Hz and high SPL capability
• DSP engine for improved performance and automatic room alignment
• Razor-sharp imaging due to extremely low tolerances (± 0.8 dB)
• Analog (XLR) and digital (RCA) inputs, optional: AES67 connectivity
• May be combined with other KH line speakers in immersive/surround setups.

Powerful bi-amplified studio monitor with reference-class performance. Its 6.5” woofer in a bass reflex cabinet provides stunning low end and high SPL capability with undiminished clarity. DSP controlled electronics ensure linear phase response and allow for room-adaptive calibration via Neumann’s revolutionary MA 1 Automatic Monitor Alignment.

• Linear frequency and phase response
• Deep low end down to 39 Hz and high SPL capability
• DSP engine for improved performance and automatic room alignment
• Razor-sharp imaging due to extremely low tolerances (± 0.8 dB)
• Analog (XLR) and digital (RCA) inputs, optional: AES67 connectivity
• May be combined with other KH line speakers in immersive/surround setups.

- 5,25" woven composite low-frequency transducer
- 1" (25 mm), ultra-low-mass, silk-dome, high-frequency transducer
- Front-firing acoustic port for superior bass-frequency reproduction
- Optimized, resonance-suppressing internal bracing
- 102 dB maximum continuous SPL
- HF Adjust (±6 dB, continuously variable)
- Midrange Adjust (±6 dB, continuously variable)
- Acoustic Space settings (flat, -2, -4 dB) for accurate mixing contour
- Highpass filter (Off, 80 Hz, 100 Hz)
- 70 watt, Class AB biamplification
- RF interference, output current limiting, over-temperature, transient, and subsonic protection
- Amplifier “soft start” feature eliminates popping on power-up
- Internal power supply with IEC connector
- Power switch with on/off LED
- Balanced XLR/ 1/4"
- Unbalanced RCA inputs

Frequency response: 49 Hz – 22 kHz (+/-3dB)
Crossover frequency: 2.5 kHz
Low-frequency amplifier power: 40 watts
High-frequency amplifier power: 30 watts
Signal-to-noise: > 100 dB (typical A-weighted)
Polarity: Positive signal at + input produces outward LF one displacement
Input impedance: 20 k ohms balanced, 10 k ohms unbalanced

3.5-inch, woven-composite, low-frequency driver
1-inch, ultra-low mass, silk-dome, high-frequency driver
50W, Class AB dual amplification
80 Hz to 20 kHz frequency response
98 dB SPL (Peak, @ 1 meter)
High- and low-frequency Acoustic Tuning controls
Balanced, ¼-inch TRS inputs; unbalanced, ⅛-inch stereo and RCA inputs; and integrated stereo headphone amplifier with front-panel ⅛-inch output
Protection: RF interference, output-current limiting, over-temperature, turn-on/off transient, subsonic filter
Power Saver mode (engages after 40 minutes)
Comes with speaker wire, ⅛-inch TRS to stereo RCA cable, and stereo ⅛-inch TRS to ⅛-inch TRS cable

3.5-inch, woven-composite, low-frequency transducer
1-inch (25 mm), ultra-low-mass, silk-dome, high-frequency transducer
Fast, reliable, stereo Bluetooth® 5.0 wireless input
50W (25W/side) Class AB amplification
80 Hz to 20 kHz frequency response
98 dB SPL (Peak, @ 1 meter)
High- and low-frequency Acoustic Tuning controls
Balanced, ¼-inch TRS inputs; unbalanced, ⅛-inch stereo and RCA inputs; and integrated stereo headphone amplifier with front-panel ⅛-inch output
Protection: RF interference, output-current limiting, over-temperature, turn-on/off transient, subsonic filter
Power Saver mode (engages after 40 minutes)

4.5-inch, woven-composite, low-frequency driver
1-inch, ultra-low mass, silk-dome, high-frequency driver
Fast, reliable stereo Bluetooth® 5.0 wireless input
50W, Class AB dual amplification
70 Hz to 20 kHz frequency response
100 dB SPL (Peak, @ 1 meter)
High- and low-frequency Acoustic Tuning controls
Balanced, ¼-inch TRS inputs; unbalanced, ⅛-inch stereo and RCA inputs; and integrated stereo headphone amplifier with front-panel ⅛-inch output
Protection: RF interference, output-current limiting, over-temperature, turn-on/off transient, subsonic filter
Power Saver mode (engages after 40 minutes)

5.25-inch, woven-composite, low-frequency driver
1-inch, ultra-low mass, silk-dome, high-frequency driver
Fast, reliable stereo Bluetooth® 5.0 wireless input
100W, Class D dual amplification
55 Hz to 20 kHz frequency response
104 dB SPL (Peak, @ 1 meter)
High- and low-frequency Acoustic Tuning controls
Balanced, ¼-inch TRS inputs; unbalanced, ⅛-inch stereo and RCA inputs; and integrated stereo headphone amplifier with front-panel ⅛-inch output
Protection: RF interference, output-current limiting, over-temperature, turn-on/off transient, subsonic filter
Power Saver mode (engages after 40 minutes)

2 Way 6.5" Active Studio Monitor with EBM Waveguide

Single point-source coaxial design for wider sweet spot and better phase alignment
6.5-inch, woven-composite, low-frequency driver
1.25-inch, silk-dome, high-frequency driver
140W, Class AB amplification
35 Hz to 20 kHz frequency response
106 dB SPL (Peak, @ 1 meter)
Acoustic Tuning Controls: Acoustic Space (Flat, -2 dB, -4 dB), High Frequency (±6 dB, center 10 kHz, continuously variable), Mid Frequency (±6 dB, center 1 kHz, continuously variable), Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)
XLR and ¼-inch TRS balanced and RCA unbalanced rear-panel inputs
Protection: RF interference, output-current limiting, over-temperature, turn-on/off transient, subsonic filter
Power Saver mode (engages after 40 minutes)

Single point-source coaxial design for wider sweet spot and better phase alignment
8-inch, woven-composite, low-frequency driver
1.25-inch, silk-dome, high-frequency driver
140W, Class AB amplification
35 Hz to 20 kHz frequency response
108 dB SPL (Peak, @ 1 meter
Acoustic Tuning Controls: Acoustic Space (Flat, -2 dB, -4 dB), High Frequency (±6 dB, center 10 kHz, continuously variable), Mid Frequency (±6 dB, center 1 kHz, continuously variable), Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)
XLR and ¼-inch TRS balanced and RCA unbalanced rear-panel inputs
Protection: RF interference, output-current limiting, over-temperature, turn-on/off transient, subsonic filter
Power Saver mode (engages after 40 minutes of no audio)

10-inch, front-firing, glass-composite, low-frequency transducer
Front-firing, bass-reflex acoustic port
Continuously variable lowpass filter (50 Hz to 130 Hz) sets the upper frequency reproduced by the subwoofer
Switchable highpass filter removes frequency content below 80 Hz from the full-range subwoofer outputs to the main monitors
Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out
Input gain control (-30 dB to +6 dB, continuously variable), polarity invert switch, and ground-lift switch
170 watt (RMS), Class AB amplification for up to 113 dB SPL, with a frequency response of 20 to 200 Hz
Left and right, balanced XLR and ¼-inch TRS and unbalanced RCA main inputs
Left and right balanced XLR and ¼-inch TRS outputs and XLR subwoofer output for connecting a second Eris® Pro Sub 10

Eris Studio 4: Compact, powerful studio monitor with 4.5-inch low-frequency transducer, 1-inch silk-dome high-frequency transducer, wide sweet spot, and Acoustic Tuning controls for exceptional audio in home studios and small mix rooms.

Introducing the Eris Studio 5: A powerful studio monitor featuring a 5.25-inch low-frequency driver, 1-inch silk-dome high-frequency driver, 100˚ x 60˚ EBM waveguide, and 80W Class AB dual amplification, providing exceptional bass reproduction, precise audio, and versatile acoustic tuning controls, making it ideal for studio environments.