Studio Microphone

The TLM 103 is the ideal large diaphragm microphone for all professional and semi-professional applications requiring the utmost in sound quality on a limited budget.

By utilizing the tried and true transformerless circuit found in numerous Neumann microphones, the TLM 103 features yet unattained low self-noise and the highest sound pressure level transmission. The capsule, derived from that u

ordercode: 007022 - Neumann Large Diaphragm Microphones - The Neumann classic. It is the world’s most widely used large-diaphragm condenser microphone. Three directional characteristics and switchable pre-attenuation ensure suitability for a wide range of applications.
Also available as a stereo set in an aluminum case, incl. elastic suspensions. 2 years warranty

- Acoustic Principle: Pressure gradient
- Active Electronics: Electret condenser, A/D and USB interface
- Polar Pattern: Cardioid
- Frequency Range: 20 Hz – 20 kHz
- Input SPL @ 1% THD: 121dB (A-weighted, as per IEC651)
- Sample Rates: 48 kHz
- Bus Powered: Yes
- Bit Depth: 24-bit
- Analog Outputs: 3.5mm headphone
- Computer Connectivity: USB - simultaneous I/O Mono input, stereo output
- Output Connection: USB-C
- OS Requirements: macOS 10.12 / Windows 10

Microfoonbundel bestaande uit: X1S studiomicrofoon en Isolation pack (shockmount + popfilter)

• Large-diaphragm (1-inch) gold-sputtered condenser capsule
• Cardioid polar pattern
• Extended frequency response
• 32-bit float digital output
• Dual Connect output – XLR and USB connectivity
• Exceptionally low self-noise (4dBA)
• High sensitivity and high SPL handling
• Ultra-low-noise, high-gain Revolution Preamp™
• High-resolution (192kHz) A/D conversion
• On-board DSP for advanced APHEX® audio processing, including a compressor, noise gate, highpass filter, and Aural Exciter™ and Big Bottom™ effects
• Studio-grade shock mount and pop filter, XLR and USB cables included
• Available in silver and black
• Designed and made in RØDE’s precision manufacturing facilities in Sydney, Australia
Box Contains
• NT1 5th Gen (Silver/Black)
• SM6 shock mount with pop filter
• 6m XLR Cable (Black/Red)
• SC29 3m USB-C to USB-C Cable
Box Contains
• NT1 5th Gen (Silver/Black)
• SM6 shock mount with pop filter
• 6m XLR Cable (Black/Red)
• SC29 3m USB-C to USB-C Cable

• Large-diaphragm (1-inch) gold-sputtered condenser capsule
• Cardioid polar pattern
• Extended frequency response
• 32-bit float digital output
• Dual Connect output – XLR and USB connectivity
• Exceptionally low self-noise (4dBA)
• High sensitivity and high SPL handling
• Ultra-low-noise, high-gain Revolution Preamp™
• High-resolution (192kHz) A/D conversion
• On-board DSP for advanced APHEX® audio processing, including a compressor, noise gate, highpass filter, and Aural Exciter™ and Big Bottom™ effects
• Studio-grade shock mount and pop filter, XLR and USB cables included
• Available in silver and black
• Designed and made in RØDE’s precision manufacturing facilities in Sydney, Australia
Box Contains
• NT1 5th Gen (Silver/Black)
• SM6 shock mount with pop filter
• 6m XLR Cable (Black/Red)
• SC29 3m USB-C to USB-C Cable
Box Contains
• NT1 5th Gen (Silver/Black)
• SM6 shock mount with pop filter
• 6m XLR Cable (Black/Red)
• SC29 3m USB-C to USB-C Cable

NT1 Kit Complete recording solution, BLACK

The MK 4 is a large-diaphragm true condenser microphone for professional studio recordings. Featuring fine resolution and outstanding sound quality, the MK 4 is easy to handle and excellent value for money, making it an ideal choice for professional project studios and home recordists.

USB-C powered (MacOS/iPadOS/Windows/Android)
Cardioid condenser capsule for professional sound and off-axis rejection
Adjustable tilt function with self-locking joint for optimal positioning
Soft-touch mute button with LED ring to indicate when engaged
Gain control with LED ring to indicate power and audio clipping
Mix control for balancing microphone and device level
3.5 mm headphone output for audio monitoring
Headphone volume control
Robust metal housing and premium finish
Profile includes microphone, table stand, and 1.2 m USB-C cable

- Acoustic Principle: Pressure Gradient
- Active Electronics: JFET impedance converter with bipolar output buffer, A/D converter 16bit 48kHz
- Capsule: 0.50"
- Polar Pattern: Cardioid
- Bit Depth: 16-bit
- Address Type: Side
- Frequency Range: 20Hz - 20kHz
- Maximum SPL: 110dB SPL
- Power Requirements: USB
- Output Connection: USB and 3.5mm headphone

DD5 Drum Microphone Set includes:
1x M82 with M782 mount
1x M80-SHB with M784 (metal) and M785 (plastic) mount
3x M81-SH with M784 (metal) and M785 (plastic) mount
5x SGMC-5R five-meter XLR with right angle female connector
1x FC80 Hard Shell Flight Case

The TELEFUNKEN Elektroakustik M80 Dynamic microphone has rapidly become a new standard for live performance and stage use. The microphone features a low-mass capsule built with a super thin Mylar membrane that is coupled with our propriety step-up transformer to give superior clarity and extended high frequency response (which in many ways is similar to what one might expect from a condenser microphone), in a rugged design meant for daily abuse in touring applications.

The M81 builds off of the same features of the M80 that have made it so popular; minimal proximity effect, superior feedback rejection, and an articulate mid-range. However, with the M81 the top end is pulled back a bit, yielding a flatter overall frequency response. The result is a microphone that not only complements the M80, but also stands on its own in a universe filled with dynamic microphones. The TELEFUNKEN M81 exhibits a wealth of body and clarity, making it a great tool for fattening up percussion, horns, and any thinner sounding sources. The controlled high frequency response is ideal for taming brighter vocals and guitar tones without sacrificing detail.

Type: Dynamic
Polar Pattern: Cardioid
Frequency Range: 25 Hz - 18 kHz, ±3 dB
Capsule: 32mm Dynamic Moving Coil
Transformer: TELEFUNKEN Elektroakustik T80
Sensitivity: 1.85 mV/Pa, ±1 dB
Output Impedance: 250 Ω
Maximum SPL (for 1% THD): 146 dB
Dimensions: 155 mm L x 63 mm Dia
Weight: 434 g
Included Accessories: Right Angle XLR Cable, Stand Mount, Zip Pouch

Backpack for the RØDECaster Pro II

In the package, you'll find the STC-20 microphone along with…
- a spider-style shockmount (with 2 spare elastics)
- nylon-mesh popshield that attaches to shockmount
- 5-metre XLR cable
- zip-up, vinyl microphone pouch

Small size – big sound: Neumann’s most affordable large diaphragm microphone

Like Father. Like Son. The WA-47jr is an FET transformerless version of the highly renowned classic ‘47 microphone that has been used on countless hit records for the last 50+ years. The WA-47jr is fully discrete, has 3 polar patterns and is designed for pro studio, home studio, live, and broadcast applications. The WA-47jr sounds great on vocals, acoustic/electric guitars, acoustic/electri

USB-C powered (MacOS/iPadOS/Windows/Android)
Cardioid condenser capsule for professional sound and off-axis rejection
Adjustable tilt function with self-locking joint for optimal positioning
Soft-touch mute button with LED ring to indicate when engaged
Gain control with LED ring to indicate power and audio clipping
Mix control for balancing microphone and device level
3.5 mm headphone output for audio monitoring
Headphone volume control
Robust metal housing and premium finish
Profile Streaming Set includes microphone, boom arm with integrated cable management, 3 m USB-C cable, and mic pouch

Profile Wireless is the compact all-in-one microphone system for freelance creators and videographers. It includes a
two-channel 2.4 GHz receiver, two clip-on microphones, and versatile mounting and connection accessories housed in an
ultra-portable charging bar that doubles as a handheld interview mic.

- Acoustic Principle: Pressure gradient
- Polar Pattern: Cardioid
- Frequency Range: 20Hz – 20kHz
- Dynamic Range @10% THD: 97dB
- Input SPL @10% THD: 118.0dB (as per IEC 60268)
- Output Connection: 3.5mm headphone connection USB-C connectivity
- Analog Outputs: 3.5mm headphone jack
- Computer Connectivity: USB-C
- Power Requirements: 5V @ 500mA (USB Bus Power)
- Bit Depth: 24-bit
- Sample Rate: 48 kHz