Alto Professional TS410 2000W 10" 2-Way Powered Loudspeaker with Bluetooth, DSP & App Control
ATO-TS410
- Output Power: 2000 W
-Low-Freq. Driver: 10.0” driver, 2.0” (50 mm) high-temperature voice coil. 1 x 650 W RMS @ 2 Ω
-High-Freq. Driver: 1.0” exit ceramic driver with 1.4” (35 mm) coil. 1 x 350 W @ 4 Ω
-Crossover Freq.: 2 kHz
-Max. SPL: 130 dB (peak), 127 dB (continuous) (dB-SPL @ 1 m)
-Freq. Response: 57 Hz – 20 kHz (+/-3 dB)
-Freq. Range: 48 Hz – 20 kHz (-10 dB)
-Horn Coverage: 90° horizontal x 60° vertical (nominal)
-Connectors: (2) XLR+1/4” (6.35 mm) TRS combo inputs (Balanced), (1) XLR output (Link) ,(1) IEC power cable input
-Input Impedance Line: 10 KΩ balanced, 20 KΩ unbalanced, Mic: 1.2K
-Line Gain/Volume Control Range: to 0 dB, +4 dBu nominal, +10 dBu for max. output
-Mic/Inst. Gain/Volume Control Range: to +50 dB
-USB Charging Port: 5V 2.1A
- Controls: Power switch, (2) gain control knobs (1 per input), (2) Mic/Line switches, Bluetooth volume control encoder, Pairing button, Stereo Link button, Sub Size button, Speaker Use button
- Indicators: (1) Input Channel Signal/Limit/Clip LED (Green = Ch1/2 Signal) (Yellow = Ch1/2 Limiter) (Red = Ch1/2 Output Clipped), (1) Bluetooth LED (Blue), (1) Link LED (Orange), (4) DSP Presets LED (Green), (3) HPF LED (Green)
- Power Connection: IEC
- Voltage: 100-120V, 50/60Hz; 220-240V, 50-60Hz
- Consumption: 900W
- Fuse: 100-120V T10AL AC250V; 220-240V T5AL AC250V
- Protection: Electronic clip, thermal, and transducer overdrive protection
- Enclosure: Injected Molded Enclosure and Perforated Metal Grille
- Mounting/Installation: Standard 36 mm pole socket, flown application with integral M10 suspension points, or in a wedge monitor position
- Operating Temp.: -10°C to 45°C (14°F to 113°F)
6 op voorraad
FEATURES:
-2000W for powerful performance
- FREE Alto App (iOS/Android) for remote configuration and contro
- Bluetooth audio streaming direct from device
- On-board DSP with 4 Speaker Use modes (inc. Custom EQ via App)
- True Wireless Stereo speaker linking via Bluetooth
- Integrated 3-channel mixer with dual XLR ¼" combo inputs, mic/line switches and independent level controls
- XLR Mix output, Speaker Use, and Sub Size Controls
- 10” driver, 2.0” (50 mm) high-temperature voice coil
- 1” exit ceramic driver with 1.4” (35 mm) coil
- Lightweight enclosure for easy transport, set up and installation
- Versatile design - pole-mountable, wedge monitor or flown application with integral M10 suspension points
- Powerful and efficient class D amplifiers with fanless cooling design to run cleaner, quieter and with greater long-term reliability
- Designed and tuned in the USA