Bodypack transmitter for tie-clip or headband microphones
Emission only
Must be combined with a tie-clip or headband GO series microphone and a GO-MONO receiver

- Power output : 700W / 4Ohms + 700W / 4Ohms
- Frequency response : 50 Hz - 200 Hz
- Axial sensitivity (1W/1m) : 96 dB
- SPL max. : 124 dB
- Nominal impedance : 8 Ohms
- Loud-speaker : 12"
- Size : 350 x 515 x 490 mm
- Net weight : 23.5 Kg
- Connectors :
- Input :
- Line level balanced XLR

- Pack of Go Mono - receiver, Go Body - bodypack transmitter and Go Head - headband transmitter
- 16 UHF Frequencies - 863-865Mhz
- Up to 4 receivers/packs at the same time
- Adjustable antennas
- Max range: 70m
- XLR or Jack output
- High quality unidirectional electret microphone
- Supplied with a microphone windshield and an adjustable headband

-4 symmetric Mic/Line inputs via XLR or Jack 6.35 (TRS)
-4 stereo inputs via RCA or mono via Jack 6.35
-4 symmetric link out outputs per zone via Phoenix plugs
-Balanced link output via Phoenix plug
-Microphone priority via input 1
-Phantom power supply for inputs 1 to 4
-Gain and tone settings (3 ways) for channels 1 to 4
-Gain settings via all inputs
-Tone settings (2 bands)

Ophangbeugel voor S10 wit

Ophangbeugel voor S6 wit

Ophangbeugel voor S8 zwart

UHF410-BNC2 - Antenna mount BNC/BNC for mounting bracket

UHF410-Body Emetteurs body pack UHF diversity

UHF410-Rall1m Cable de rallonge d'antenne BNC/BNC 1 mètre

-Radio: webradio through Ethernet/Wifi, DAB and DAB+ digital radio, FM with RDS
-MP3 player: the USB port allows you to play MP3/AAC/WMA/FLAC files from a FAT32 USB flash drive or external hard drive
-Shared files: share the audio files available on your computer network and your favourite playlists
-Programmable start-up by calendar with choice of source
-Infrared remote control

100v to 8 ohm Transformer 100v 2,5/5/10/20w in 8Ohms 20W out

100v to 8 ohm Transformer 100V 7,5/15/30/60w in 8Ohms 60W out

TNC Antenna 514~542 MHz

- Magnetic loop amplifier for 1000m² area.

BM-A250 - Loop amplifier for surfaces of 250m²

BM-Cu100 - Copper tape 100m -18mm wide x 0,1mm thick

BM-Cu50 - Copper tape 50m -18mm wide x 0,1mm thick

BM-KIT - KIT loop amplifier for desk

-Compatible with Audiophony transmitters GObody & UGL410-Body

-Power ratings: 35W
-Impedance: 8 Ohms
-Components: 8" + 1" + 1
-Sensitivity (1W/1m): 86 dB, +/-3dB
-Frequency response: 55-20 000 Hz
-Construction: White ABS body and magnetic grid
-Hook: 4 screwed tabs
-Cutting diameter: 220 mm
-Dimensions: 260 mm (diameter) x 100 mm
-Weight: 1,4 Kg

-Power output: 3/6W
-Power supply: 100V
-Components: 5" speaker
-Sensitivity (1W/1m): 93dB, +/-3dB
-Frequency response: 100-15,000Hz
-Material: white ABS enclosure and metallic grille
-Mounting: 2 spring-loaded brackets
-Connectors: 3-contact connector
-Drill hole diameter: 145mm
-Dimensions: 160(diam) x 54 (H) mm
-Weight: 500g

-Power output : 5/10/20W
-Power supply: 100V 8 ohms
-Components: 5"
-Sensitivity (1W/1m): 88dB, +/-3dB
-Frequency response: 100 - 20,000Hz
-Material: black ABS enclosure and white metallic magnetic grille
-Mounting: 3 screw-on brackets
-Connectivity: 4-contact connector
-Drill hole diameter: 180mm
-Dimensions (diameter and height): 203 x 85mm
-Weight: 1.5kg

CHP520 - Black Ceiling grid

-Power output: 5/10/20W
-Power supply: 100V 8 ohms
-Components: 4" + 1/2"
-Sensitivity (1W/1m): 89dB, +/-3dB
-Frequency reponse: 90 - 18,000Hz
-Material: white ABS enclosure and metallic grille
-Mounting: 4 screw-on brackets
-Connectivity: 4-contact connector
-Drill hole dimensions: 156 x 156 mm
-Dimensions: 190 x 190 x 80 (H) mm
-Weight: 1.3kg

-2-way speaker
-RMS power output: 60W at 8 ohms
-Max power output: 200W at 8 ohms
-Power output: - 1.25/2.5/5/10W at 70V or 100V- 60W at 8 ohms
-Impedance: 8 ohms/70V/100V
-Tweeter: 25mm (1")
-Boomer: 165mm (6.5")
-Frequency response: 56Hz - 20kHz
-Sensitivity >90dB
-Mounting: 4 screw-on brackets
-External dimensions (diameter and depth): 240 x 140 mm
-Drill hole diameter: 208 mm

- 2-way speaker
-RMS power output: 20W
-Max power output: 30W
-Power output: 20W or 10W
-100V
-Tweeter: 25mm (1.5")
-Boomer: 165mm (6.5")
-Frequency response: 85Hz - 18kHz
-Sensitivity >98dB
-Mounting: 4 screw-on brackets
-External dimensions (diameter and depth): 233 x 118 mm
-Drill hole diameter: 200mm
-Net weight: 1.7kg

-Power output : 7.5/15/30W
-Power supply: 100V 8 ohms
-Components: 6.5"
-Sensitivity (1W/1m): 88dB, +/-3dB
-Frequency response: 60 - 20,000Hz
-Material: black ABS enclosure and white magnetic grille
-Mounting: 3 screw-on brackets
-Connectivity: 4-contact connector
-Drill hole diameter: 210mm
-Dimensions (diameter and height): 232 x 90mm
-Weight: 1.85kg

Grille plafonnier noire pour CHP630

-Power output: 7.5/15/30W
-Power supply: 100V 8 ohms
-Components: 5" + 0.5?
-Sensitivity (1W/1m): 89dB, +/- 3dB
-Frequency response: 90-20,000Hz
-Material: white ABS enclosure
-Mounting: 4 screw-on brackets
-Drill hole diameter: 210mm
-Dimensions: 220 x 220 x 95 mm
-Weight: 980g