Smallest dimensions and very light weight,
Easy one-hand-operation
Battery supplies energy only when necessary to increase the Standby time
Warm up time only 1 second
Continuous output
Fogging time programmable
Minimal fluid consumption (0.5 ml/min. at continuous output)
Supplied in a case for transport and storage

Very small dimensions
Battery supplies energy only when necessary
Warm up time less than 1 sec.
Continuous output
Fogging time programmable
Minimal fluid consumption
Trigger directly at the machine, with cable remote and optionally with radio remote, DMX converter or Timer
Carrying case

Small dimensions and light weight enables an easily installation into costumes and props
Battery supplies energy only when the fogging process is activated. Thus ensures an increased fog time and ready for operation time
Warm up time less than 1 second
Continuous output
Fogging time programmable
Control via start button, cable remote and as an option with radio remote, DMX-converter or timer
Minimal fluid consumption (2,3 ml/min. at continuous output)
Supplied in a case for transport and stocking

Small dimensions, light weight
Battery supplies energy only when necessary
Warm up time less than 1 second
Continuous output
Lowest fluid consumption
Changeable battery
Triggered with the start button or the optional radio remote, DMX-converter and timer

Portable use
Heat-up time only one second
Light weight, small dimensions
Adjustable output
250 hours stand-by time
Continuous output
Easy handling
Control via start button or analog (0 - 12V) and with XLR-remote, radio remote, DMX-converter, Timer
Minimal fluid consumption
Easy change of the batterypack

- Procedure: Haze generator without compressor
- Power requirement: 1500 Watt
- Voltage: available for: 230 V / 50 Hz, 120 V / 60 Hz, 90 V / 50 Hz
- Warm up time: approx. 60 sec.
- Fluid tank capacity: 2 l for up to 50 hrs cont. output
- Integrierter Lüfter: > 6000 l / min.
- Haze density: adjustable in 99 steps
- Temperature control: Microprocessor controlled
- Overheating protection: Heater block with thermostat, pump with temperature switch
- Control: DMX 512, 0 - 10 V analog

DMX as standard, analog and stand-alone-mode
Internal timer
Fog output adjustable in steps of 1% (0 - 99%)
Continuous output
Easy handling
Powerful output

DMX as standard, analog and stand-alone-mode
Internal timer
Fog output adjustable in steps of 1% (0 - 99%)
Continuous output
Easy handling
Powerful output

- Procedure: Vaporizing fog generator
- Power requirement: 2600 Watt
- Voltage: 230 V / 50 Hz
- Warm up time: approx. 10 min.
- Fluid consumption: 240 ml/min. at max. output, 70 ml/min. at continuous output
- Fluid tank capacity: 5 liter
- Fog output: adjustable in 99 steps
- Output projection: max. 15 m
- Fogging time: approx. 40 sec. at max. output, at < 50% continuous output
- Temperature control: Microprocessor controlled
- Overheating protection: Heater block/thermostat, Pump/Thermal switch
- Control: DMX 512, 0 - 10 V analog

- Procedure: Vaporizing fog generator
- Power requirement: 3100 Watt
- Voltage: 230 V / 50 Hz
- Warm up time: approx. 15 min.
- Fluid consumption: 260 ml/min. at max. output, 46 ml/min. at continuous output (with Look Regular Fluid)
- Fluid tank capacity: 5 liter
- Fog output: adjustable in 100 steps
- Output projection: max. 25 m
- Fogging time: at max. output: Extended-Mode: approx. 55 sec., Impulse-Mode: approx. 22 sec., at < 30% output: Continuous output
- Temperature control: Microprocessor controlled
- Overheating protection: Heater block/Thermostat, Pump/Thermal switch
- Control: Ethernet (Artnet, sACN), DMX 512, 0 - 10 V analog

Boa 64 220 - 250V

- Procedure: Vaporizing fog machine
- Power requirement: 9000 Watt / 8320 Watt (208 V)
- Voltage: 400 V / 50 Hz / 16 A CEE, 1 x 208 V / 60 Hz / 40 A (USA)
- Warm up time: approx. 15 min.
- Fluid consumption: 500 ml/min. at 100% output, 145 ml/min. at continuous output
- Fluid tank capacity: 5 litre
- Fog output: adjustable in 99 steps
- Output projection: max. 30 m
- Fogging time: approx. 2 min. at max. output, at < 50% continous output
- Temperature control: Microprocessor controlled
- Overheating protection: Heater block/thermostat, Pump/Thermal switch
- Control: DMX 512, 0 - 10 V analog

- Procedure: Vaporizing fog generator
- Power requirement: 2600 Watt
- Voltage: 230 V / 50 Hz
- Warm up time: approx. 10 min.
- Fluid consumption: 240 ml/min. at max. output, . 70 ml/min. at continuous output
- Fluid tank capacity: 5 liter
- Fog output: adjustable in 99 steps
- Output projection: max. 25 m
- Fogging time: approx. 40 sec. at max. output, at < 50% continuous output
- Temperature control: Microprocessor controlled
- Overheating protection: Heater block/thermostat, Pump/Thermal switch
- Control: DMX 512, 0 - 10 V analog

- Procedure: Vaporizing fog generator
- Power requirement: 1300 Watt
- Voltage: 230 V / 50 Hz,120 V / 60 Hz
- Warm up time: approx. 7 min.
- Fluid consumption: 120 ml/min. at max. output, 35 ml/min. at continuous output
- Fluid tank capacity: 5 liter
- Fog output: adjustable in 99 steps
- Output projection: max. 15 m
- Fogging time: approx. 30 sec. at max. output, at < 50% continuous output
- Temperature control: Microprocessor controlled
- Overheating protection: Heater block/thermostat, Pump/Thermal switch

Internal fluid tank 2L
DMX 512, DMX, Ethernet, RDM
Incl Filling nozzle

- Procedure: Vaporizing fog machine with CO2 cooling system
- Power requirement: 2300 Watt / 1700 Watt (at 120 V)
- Voltage: 230 V / 50 Hz, 120 V / 60 Hz
- Warm up time: approx. 7 min.
- Fluid consumption: at 100% output 100 ml/min, at 50% output 40 ml/Min.
- Fluid tank capacity: 5 liter
- Fog output: adjustable in 99 steps
- Fogging time: continous output
- Temperature control: Microprocessor controlled
- Overheating protection: Heater block/thermostat, Pump/Thermal switch
- Control: DMX 512, 0 – 10 V analog

- Procedure: Vaporizing fog machine with CO2 cooling system
- Power requirement: 2300 Watt / 1700 Watt (at 120 V)
- Voltage: 230 V / 50 Hz, 120 V / 60 Hz
- Warm up time: approx. 7 min.
- Fluid consumption: at 100% output 100 ml/min, at 50% output 40 ml/Min.
- Fluid tank capacity: 5 liter
- Fog output: adjustable in 99 steps
- Fogging time: continous output
- Temperature control: Microprocessor controlled
- Overheating protection: Heater block/thermostat, Pump/Thermal switch
- Control: DMX 512, 0 – 10 V analog

Cryo-Gate 90 - 240VAC Low fog converter to be used with high pressure bottles with riser pipe, 65 Watt

Cryo-Gate 90 - 240VAC Complete Low fog converter to be used with high pressure bottles with riser pipe, 65 Watt

- Procedure: Axial blower
- Power consumption: 850 Watt
- Speed: max. 1250 rpm
- Volume flow: approx. 9000 m3/hrs.
- Adjustments: 0 - 99%
- Voltage: 230 V / 50 Hz
- Control: DMX 512, 0 - 10 V analog
- Delivery includes: Hanging yoke, Truecon mains cable

- Procedure: Axial blower
- Power consumption: 150 Watt
- Speed: max. 1250 rpm
- Volume flow: approx. 9000 m3/hrs.
- Adjustments: 0 - 99%
- Voltage: 230 V / 50 Hz
- Control: DMX 512, 0 - 10 V analog
- Delivery includes: Hanging yoke, Truecon mains cable